674767
88
Zoom out
Zoom in
Previous page
1/156
Next page
88
Communicating with a Specific Remote Station
Using the Tone Squelch Function
Notification of Call from the Remote Station by
Vibration of the Vibrator
Set the vibrator to alert you of a call from a remote station containing a corresponding
CTCSS tone or DCS code.
Enter the Set mode:
1 Press and hold M over 1 second.
2 Turn O to select [8 CONFIG].
3 Press H.
4 Turn O to select [22 VIBRATOR].
5 Press H.
6 Turn O to select [MODE].
7 Press H.
8 Turn O to select [SIGNALING].
9 Press p to set the Vibrator mode and exit the Set mode.
Tip To turn off the Vibrator function, select [OFF] in step 7.
Tips
The vibrator function can be set for all frequency bands belonging to A-band (Main) and B-band
(Sub).
Selecting [8 CONFIG]  [22 VIBRATOR]  [MODE] and
then [BUSY] for [MODE] in the Set mode will cause the vibrator to
start vibrating when the BUSY LED lights upon reception of a
signal.
If the BUSY state is not held continuously over 5 seconds, the
suspended state is canceled.
If the p switch is operated to change the communication mode from transmission to reception
when the vibrator is turned ON, the vibrator function is turned off for 5 seconds.
Selecting Vibrator Operation Mode
Enter the Set mode:
1 Press and hold M over 1 second.
2 Turn O to select [8 CONFIG].
3 Press H.
4 Turn O to select [22 VIBRATOR].
5 Press H.
FT1DR_DE_Eng.indb 88FT1DR_DE_Eng.indb 88 13/06/28 15:1613/06/28 15:16
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT1DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT1DR in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info