674767
69
Zoom out
Zoom in
Previous page
1/156
Next page
69
Using the GPS Function
Method of Positioning by GPS
Displaying Current Position Information of Your Station
1
Turn on the transceiver.
2 Press and hold M for over 1 second to enter the Set mode.
3 Turn O to select [1 DISPLAY].
4 Press H.
5 Turn O to select [1 GPS POWER].
6 Press H.
7 GPS data appears on the LCD.
An arrow icon (the direction in which you are heading),
your current position, number of satellites, longitude,
latitude, and altitude appear on the LCD.
Tips The arrow icon (the direction in which you are heading) will
not appear and the latitude/altitude blinks until GPS satellite data is acquired.
When GPS satellite data has been acquired, the arrow icon (the direction in which you are
heading) will appear, the latitude/altitude will change from blinking to lit, and your current
position will be displayed.
If acquisition of GPS satellite data is interrupted due to an obstacle, such as a building or
tunnel, only the arrow icon (the direction in which you are heading) disappears.
8 Press O to scroll the screen, and display the current time.
Pressing O again displays GPS data.
The GPS screens will transition each time H is pressed.
9. Press p.
The screen returns from the GPS screen to the normal
frequency display. (Not return to the transmission state)
Displaying Position Information of Remote Station in Digital Mode
With the V/D mode C4FM digital, because GPS position information is transmitted
simultaneously with voice signals, the direction and position of the remote station can be
displayed in real-time even while communicating.
For details, see “Real-Time Navigation Function” on page 73.
Tip
Even if the GPS function of your station is set to OFF, position information of the remote station can
be displayed in V/D mode.
Caution
z If the GPS function is not active, the remote station will not be able to acquire position information
for your station.
FT1DR_DE_Eng.indb 69FT1DR_DE_Eng.indb 69 13/06/28 15:1613/06/28 15:16
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT1DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT1DR in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info