674767
40
Zoom out
Zoom in
Previous page
1/156
Next page
40
Repeater Operation
Repeater Operation
Repeater Operation
Communicating Via the Repeater
The transceiver includes an ARS (Automatic Repeater Shift) function which permits
communication through the repeater automatically just by setting the receiver to the
repeater frequency.
1 Set the receive frequency to the repeater frequency.
” or “
” appears in the upper right corner of the
LCD.
2 Press p, to begin communicating through the
repeater.
Tips
• Pressing F and then pressing 5 enters the “reverse” state where the transmit frequency
and the receive frequency are temporarily reversed. This allows you to check and find if direct
communication with the remote station is possible.
In the “reverse” state, [
] blinks on the LCD.
• Pressing F again and then 5 exits the “reverse” state.
Press and hold M over 1 second to enter the Set mode and change the options to allow more
convenient use of this function.
[8 CONFIG]  [14 RPT ARS] You can deactivate the ARS function.
[8 CONFIG]  [15 RPT SHIFT] You can set the repeater shift direction.
[8 CONFIG]  [16 RPT SHIFT FREQ] You can change the repeater shift step.
Tone Calling (1750 Hz)
If your transceiver is FT1DE (European version), press and hold in the T switch
(just below the p switch) to generates a 1750 Hz burst tone to access the European
repeater. The transmitter will automatically be activated, and a 1750 Hz audio tone will
be superimposed on the carrier. Once access to the repeater has been gained, you may
release the T switch, and use the p switch for activating the transmitter thereafter.
If you need to access the repeaters which requires a 1750 Hz burst tone for access by
the FT1DR (USA/EXP versions), you can set the T switch to serve as a “Tone Call”
switch instead. To change the configuration of this switch, use Set Mode [8 CONFIG] 
[10 MONI/T-CALL].
䰀䰀
䎕䎘
FT1DR_DE_Eng.indb 40FT1DR_DE_Eng.indb 40 13/06/28 15:1613/06/28 15:16
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT1DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT1DR in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info