674767
20
Zoom out
Zoom in
Previous page
1/156
Next page
20
Basic Operation
Preparation
Connecting an External Power Supply for Use in Vehicle
(USA/EXP version only)
The optional external power supply adapter with
a cigarette lighter plug (E-DC-5B) allows the
transceiver to be used in a vehicle.
1 Turn off the transceiver.
2 Insert the plug of the external power supply
adapter with a cigarette lighter plug (E-DC-
5B) in the EXT DC IN jack of the transceiver.
3 Insert the cigarette lighter plug of the external
power supply adapter (E-DC-5B) in the
cigarette lighter socket of the vehicle.
Cautions
z The E-DC-5B is compatible with a 12 VDC cigarette lighter socket. Do not connect the E-DC-5B to
the 24 VDC cigarette lighter socket.
z Use the transceiver at the minimum required transmission power level to prevent overheating.
z Do not continue transmission for a prolonged period of time. The transceiver may overheat, resulting
in malfunction or burns.
z If you operate the transceiver for 7 hours or longer, it is recommended that you remove the battery
pack and install the optional battery case (FBA-39).
z Recharging the fully-charged battery pack repeatedly can shorten its service life. Be extremely
careful not to do so when you operate the transceiver when using an external power supply.
z While charging the battery pack, protect the transceiver from water.
z Charge the battery pack in a place where the ambient temperature is +5 °C to +35 °C (+41 °F to
+95 °F).
z If the terminal or electrode of the battery case is dirty, the transceiver can malfunction due to poor
contact, resulting in overheating or rupture. If the terminal or electrode gets dirty, clean it using a dry
cloth or cotton swab.
Tips
The battery pack can be charged within approximately 5 hours using the external power supply
(approximately 8 hours to charge the optional battery pack FNB-102LI). If the battery pack is
charged with the transceiver turned on, the charging time increases slightly.
When the battery pack has been fully charged, charging stops automatically.
The external power supply can be used with the battery case installed.
If you connect the transceiver to the external power supply with it turned off, “CONNECTED
TO EXTERNAL POWER” appears on the LCD, and about 20 seconds later “BATTERY NOT
INSTALLED” appears.
Connecting to an External Power Supply Using a Power Cable
(USA/EXP version only)
The optional power cable (E-DC-6) allows the transceiver to be connected to an external
power supply.
To cigarette lighter socket
of vehicle
EXT DC IN jack
External power supply
adapter with a cigarette
lighter plug
E-DC-5B (option)
FT1DR_DE_Eng.indb 20FT1DR_DE_Eng.indb 20 13/06/28 15:1613/06/28 15:16
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT1DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT1DR in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info