674767
12
Zoom out
Zoom in
Previous page
1/156
Next page
12
Read this information first
Names and Functions of Controls
a
Antenna terminal (SMA)*
b
Flashlight (White LED)
This LED can be used as a small flashlight in a
dark place.
c
A-band BUSY/TX lamp
B-band BUSY/TX lamp
These lamps light green during reception and red
during transmission.
d
p PTT switch
• While p switch is being pressed: Transmission.
The Set mode ends when p switch is pressed
during the Set mode.
e
T switch
USA/EXP version
While T is being pressed: Squelch OFF
European version
While T is being pressed: T.CALL (1750 Hz)
f
v switch
• While pressing v, turn O: Volume level
adjustment
• Pressing v during the sound is being muted
cancels the Mute function.
g
P Power switch
Press and hold P over 1 second: Power on.
Press and hold P over 1 second again:
Power off.
• Press P : Key lock
h
A key (switching between operating bands)
• Pressing A each time switches between
A-band and B-band.
Press and hold A over 1 second: Changes
the Dual Band Reception mode to the Mono
Band Reception mode.
While operating the transceiver in the Mono
Band Reception mode, press F and then
A: Zooms in the display view.
i
M key
• Pressing M each time switches between the
Frequency and BACKTRACK screen.
Press and hold M over 1 second: Enters the
Set mode.
j
Battery pack*
k
O
Turn this dial to change the reception frequency or
select a memory channel.
l
GPS antenna
m
MIC/SP jack*
Connect a speaker microphone or earpiece
microphone to this jack.
It is not waterproofed when an external
microphone is connected.
Do not connect any microphone which is
not specified by Yaesu. A failure can result.
n
EXT DC IN jack*
When charging the battery pack, connect the
battery charger (PA-48 or SAD-11B) to this jack.
In the USA/EXP market, connect an external
power supply adapter with a cigarette lighter
plug (E-DC-5B) or an external power cable
(E-DC-6) to this jack.
Do not connect any battery charger which
is not specified by Yaesu. A failure can
result.
o
DATA terminal*
Use this terminal when using a clone function or
updating the firmware.
Connect the optional camera-equipped
microphone (MH-85A11U).
For how to update the firmware, access our
home page.
p
Microphone
q
Display
This LCD displays reception frequencies and
various settings.
r
Speaker
s
15 keys
These keys are used to specify reception/
transmission frequency or select a function.
t
F switch
• Press F Function switch
Press and hold F over 1 second: Registers a
frequency to a memory channel.
* When the included antenna and battery pack
are installed and the MIC/SP jack, EXT DC
IN jack, DATA terminal, and micro SD slot are
securely covered with rubber caps, the FT1DR/
DE meets the waterproofing performance
conforming to IPX5 (See page 11).
FT1DR_DE_Eng.indb 12FT1DR_DE_Eng.indb 12 13/06/28 15:1513/06/28 15:15
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT1DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT1DR in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info