674752
150
Zoom out
Zoom in
Previous page
1/164
Next page
Page 148 FT DX 9000MP OPERATION MANUAL
MENU MODE
TX GNRL GROUP
154. TX MAX POWER
Function: Selects a maximum output power limit.
Available Values: 400/200/100/50 W
Default Setting: 400 W
155. TX PWR CONTROL
Function: Configures the RF PWR knob.
Available Values: ALL MODE/CARRIER
Default Setting: ALL MODE
ALL MODE: The RF PWR knob is enabled on all
modes.
CARRIER: The RF PWR knob is enabled in all
modes except SSB. In this configuration,
the SSB output power will be set to maxi-
mum, regardless of the RF PWR knob’s
position.
156. EXT AMP TX-GND
Function: Enables/Disables the TX GND jack on the
rear panel.
Available Values: ENABLE/DISABLE
Default Setting: DISABLE
157. EXT AMP TUNING PWR
Function: Selects a maximum output power limit for
driving the input circuit of an external linear RF ampli-
fier while tuning (while using the Remote Control func-
tion of the linear RF amplifier).
Available Values: 400/200/100/50 W
Default Setting: 100 W
158. FULL DUPLEX
Function: Enables/Disables Full Duplex operation.
Available Values: SIMP/DUP
Default Setting: SIMP
When this menu is set to “DUP,” you may receive on
the sub band (VFO-B) frequency while transmitting,
during dual receive operation, on a different band on
the main band (VFO-A).
159. VOX SELECT
Function: Selects the audio input source for trigger-
ing TX during VOX operation.
Available Values: MIC/DATA
Default Setting: MIC
MIC: The VOX function will be activated by micro-
phone audio input.
DATA: The VOX function will be activated by data
audio input.
160. EMERGENCY FREQ TX
Function: Enables Tx/Rx operation on the Alaska
Emergency Channel, 5167.5 kHz.
Available Values: DISABLE/ENABLE
Default Setting: DISABLE
When this Menu Item is set to “ENABLE,” the spot
frequency of 5167.5 kHz will be enabled. The Alaska
Emergency Channel will be found between the Memory
channels “P-1” and “01 (or 1-01).”
150


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-DX9000MP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-DX9000MP in the language / languages: English as an attachment in your email.

The manual is 11,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info