674754
55
Zoom out
Zoom in
Previous page
1/156
Next page
Page 53FT DX 9000D OPERATION MANUAL
CONVENIENT FEATURES
“MY BANDS” OPERATION
When operating on an Amateur Band on the Main (VFO-A) register, it is possible to use the BAND/MHz switch (# )
to engage the use of the CLAR/VFO-B knob (# ) for Amateur band selection. The “My Bands” feature allows you to
select several Amateur bands, and make only those bands available for selection via the CLAR/VFO-B tuning knob.
This feature can be very useful in a contest, where the 10/18/24 MHz band are not used, or if you do not have antennas for
some bands.
“My Bands” Setup
1. Press the MNU key (# ) to engage the Menu
mode; the Menu list will appear on the TFT.
2. Rotate the Main Tuning Dial (# ) to select Menu
item “TUNING 135 MY BAND”.
3. Rotate the CLAR/VFO-B knob (# ) to choose a
band that you wish to skip (omit) from the band-se-
lection loop (when using the CLAR/VFO-B knob
for band selection). The available choices are 1.8/3.5/
7/10/14/18/21/24/28/50/GEN/TRV, and the factory-
default selection is TRV (only).
4. Press the ENT key (# ) to set the omission com-
mand to ON.
5. Repeat steps 3 and 4 to select/deselect as many bands
as you like.
Note
The “ON” command sets the selected band to be skipped, while
the “OFF” command sets the selected band to be included in
the band-selection list.
6. Press and hold in the MNU key for two seconds to
lock in the new configuration and exit to normal op-
eration.
“My Bands” Operation
1. Press the BAND/MHz switch (# ); the imbed-
ded LED will glow Red.
2. Rotate the CLAR/VFO-B knob (# ) to choose the
Amateur band on which you wish to operate. Only
those Amateur bands that have not been skipped will
appear as you scroll through the bands.
MAIN tuning dial knob
MNU key
ENT key
BAND/MHz knob
CLAR/VFO-B knob
1.8MHz
3.5
7
10
14
18
21
24
28
50
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
TRV
GEN
3.5
7
14
21
28
MHz
MHz
MHz
MHz
MHz
«
3.5MHz
7MHz
14MHz
21M Hz
28MHz
CLAR/VFO-B knob
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-DX9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-DX9000 in the language / languages: English as an attachment in your email.

The manual is 25,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info