674754
42
Zoom out
Zoom in
Previous page
1/156
Next page
Page 40 FT DX 9000D OPERATION MANUAL
TFT FEATURE/CONTROL DETAILS
Pressing any of these keys provides one-touch access
to the Amateur bands from 1.8 ~ 28 MHz. When the
ENT key has been pressed first, these keys then
serve as the frequency entry digits (“1” ~ “0”) during
direct frequency entry.
Pressing this key provides one-touch access to the 50
MHz Amateur band. When the ENT key has been
pushed first, to engage direct frequency entry, press-
ing this key sets the decimal point after the “MHz”
portion of the frequency.
This key turns the 28 MHz low-level (0 dBm) output
from the rear-panel’s TRV jack ON or OFF. When
the Transverter function is turned on, both the TFT
and the main frequency display will show the con-
verted frequency’s last two digits of the “MHz” field,
according to the band programmed via Menu #034
(for example, if your transverted frequency is
144.200.00 MHz, the display will show “44.200.00”
as the operating frequency.
Pressing this key selects the “General Coverage” VFO
register, for reception outside the Amateur bands.
Pressing this key momentarily engages the “direct fre-
quency entry” mode of operation, whereby the keys
described in the (A) and (B) sections above are used
for directly programming the operating frequency.
Once the frequency has been successfully entered,
press the ENT key once more to exit to the newly-
selected frequency.
For entering a frequency directly into the Sub (VFO-
B) register, press this key. Then use the keys described
in sections (A) and (B) above for entering the digits
of the desired frequency; when done, press the V- B
key once more to lock the newly- selected frequency
into the Sub (VFO-B) register.
This key is used for gaining access to the Menu sys-
tem, for configuring various transceiver characteris-
tics. Menu operation is described in detail, in this
manual, beginning on page 126.
Important note:
pressing this key momentarily activates the Menu, and
the Menu selections will appear on the TFT screen;
once you are finished, you must press and hold in the
MNU key for two seconds to save any configura-
tion changes (momentarily pressing MNU to exit
will not save the changes).
These are the “Function” keys for the various func-
tions associated with each page of the TFT’s opera-
tional capability. The exact function of each key will
depend on the page selected.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-DX9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-DX9000 in the language / languages: English as an attachment in your email.

The manual is 25,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info