674754
19
Zoom out
Zoom in
Previous page
1/156
Next page
Page 17FT DX 9000D OPERATION MANUAL
21
ANT 1
ANT 2
ANT 3
ANT 4
REMOTE
ON
OFF
BAND DATA 1
BAND DATA 2
GND
ALC 2
ALC 1
PTT 2
PTT 1
INPUT 1
INPUT 2
CONTROL
DC48V IN
ANT
ANT 1
ANT 2
ANT 3
INPUT 1
EXT ALC
BAND DATA 1
BAND-DATA 1
BAND-DATA 2
GND
GND
DC 48V IN
CONTROL
ALC 1
CONTROL CABLE User constructed
()
BAND DATA CABLE
()
Supplied w/VL-1000
ALC CABLE Supplied w/VL-1000
()
VP-1000
VP-1000

ANTENNA CABLE Supplied w/VL-1000
()
ANTENNA
~AC IN
BAND DATA 2
INSTALLATION AND INTERCONNECTIONS
VL-1000 LINEAR AMPLIFIER INTERCONNECTIONS
Be sure that both the FT DX 9000D and VL-1000 are turned off, then follow the installation recommendations contained in
the illustration.
On the rear panel of the VL-1000, please set the “ATT” switch to the “ON” position. The 200-Watt power output from the
FT DX 9000D is far in excess of what is required to drive the VL-1000 to its full rated output.
Note
G Please refer to the VL-1000 Operating Manual for details regarding amplifier operation.
G Please do not attempt to connect or disconnect coaxial cables when your hands are wet.
About the CONTROL Cable
The VL-1000 may be operated with the FT DX 9000D
whether or not the CONTROL Cable is connected;
however, the CONTROL Cable allows you to tune
up the amplifier automatically by just pressing the
[F SET] or [TUNE] key on the VL-1000, so as to
transmit a carrier for tuning purposes.
To link the FT DX 9000D and VL-1000 Power
switches, set the VL-1000 REMOTE switch to the
ON position.
Control Cable Modification
Please cut off the RCA connector on one end of the
CONTROL Cable supplied with the VL-1000, and
install a 7-pin DIN connector in its place, accord-
ing to the illustration.
Pin 7
TRQ
Pin 3
GND
Pin 9
F SET COMMON
Pin 11
F SET 2
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-DX9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-DX9000 in the language / languages: English as an attachment in your email.

The manual is 25,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info