478504
120
Zoom out
Zoom in
Previous page
1/132
Next page
Page 118 FT-950 OPERATING MANUAL
114 TGEN VOX SEL
Function: Selects the audio input source for triggering TX
during VOX operation.
Available Values: nic/dAtA
Default Setting: nic
nic (MIC): The VOX function will be activated by mi-
crophone audio input.
dAtA (DATA): The VOX function will be activated by
data audio input port (pin 1) of the RTTY/
PKT Jack.
115 TGEN V GAIN
Function: Adjusts the “VOX” Gain on the SSB/AM/FM
modes.
Available Values: 0 ~ 100
Default Setting: 50
116 TGEN VOX DLY
Function: Adjusts the “VOX” Delay (receiver recovery)
time on the SSB/AM/FM modes.
Available Values: 30 ~ 3000 msec (10 msec/step)
Default Setting: 500 msec
117 TGEN ANTIVOX
Function: Adjusts the Anti-VOX Trip Gain, which is the
level of negative AF feedback of receiver audio to the mi-
crophone, to prevent receiver audio from activating the
transmitter (via the microphone) during VOX operation.
Available Values: 0 ~ 100
Default Setting: 50
118 TGEN EMRGNCY
Function: Enables Tx/Rx operation on the Alaska Emer-
gency Channel, 5167.5 kHz.
Available Values: EnA(ENABLE)/diS(DISABLE)
Default Setting: diS(DISABLE)
When this Menu Item is set to “EnA(ENABLE),” the spot
frequency of 5167.5 kHz will be enabled. The Alaska
Emergency Channel will be found between the Memory
channels “P-1” and “01 (or 1-01).”
Important: The use of this frequency is restricted to sta-
tions operating in or near Alaska, and only for emergency
purposes (never for routine operations). See §97.401(c)
of the FCC’s regulations for details.
TX GENERAL GROUP
109 TGEN PROCLVL
Function: Sets a compression level of the Speech Proces-
sor.
Available Values: 1 ~ 100
Default Setting: 50
110 TGEN EXT TUN
Function: Enable/disable the optional FC-40 Antenna
Tuner.
Available Values: itu/Etu (INTERNAL TUNER/EXTER-
NAL TUNER)
Default Setting: itu (INTERNAL)
itu (INTERNAL TUNER): The
[
TUNE
]
button will ac-
tivate the internal Antenna
Tuner.
Etu (EXTERNAL TUNER): The
[
TUNE
]
button will ac-
tivate the optional FC-40
Antenna Tuner.
111 TGEN TX PWR
Function: Sets a transmitter output level.
Available Values: 5 ~ 100 %
Default Setting: 100 %
112 TGEN AM CAR
Function: Sets a carrier power output level.
Available Values: 0 ~ 100
Default Setting: 50
113 TGEN PWRCTRL
Function: Setting the menu item “111 TGEN TX PWR”.
Available Values: ALL/CAr
Default Setting: ALL
ALL: The Menu Item “111 TGEN TX PWR” affects all
modes except AM.
CAr: The Menu Item “111 TGEN TX PWR” affects all
modes except SSB. In this case, the SSB output
power will be set to maximum, regardless of the
setting of the Menu Item “111 TGEN TX PWR”.
MENU MODE
120


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info