478504
90
Zoom out
Zoom in
Previous page
1/132
Next page
Page 88 FT-950 OPERATING MANUAL
CTCSS TONE FREQUENCY
(
Hz
)
67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4
88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9
114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8
177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5
203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8
250.3 251.4
FM MODE OPERATION
REPEATER OPERATION
The FT-950 may be utilized on 29 MHz and 50 MHz repeaters.
1. Rotate the Main Tuning Dial knob to the output fre-
quency (downlink) from the repeater.
2. If CTCSS Tone operation is desired/needed, press and
hold in the
[
AM/FM
]
button for one second to engage
the CTCSS mode.
3. Rotate the Main Tuning Dial knob to select the desired
CTCSS mode. If you just need to send the uplink en-
coding tone, select “TN.” For encode/decode opera-
tion, choose “TS” instead. The available choices are
OFFTN (Tone Encoder)”
TS (Tone Squelch)” OFF”.
4. Rotate the
[
CLAR/VFO-B
]
knob to select the desired
CTCSS Tone to be used. A total of 50 standard CTCSS
tones are provided (see the CTCSS Tone Chart).
5. Press the
[
AM/FM
]
Mode button to select the desired
repeater shift direction. The selections are:
S+S
where “S” represents “Simplex” operation (not used
on a repeater).
6. Press and hold in the
[
AM/FM
]
button for one second
to exit from the repeater setup mode.
7. Close the microphone’s PTT switch (or press the
[
MOX
]
button) to begin transmission. You will observe
that the frequency has shifted to correspond to the pro-
gramming you set up in the previous steps, and a “T
notation will appear on the “10 Hz” frequency digit
while transmitting. Speak into the microphone in a
normal voice level. Release the PTT switch or
[
MOX
]
button to return to the receive mode.
ADVICE:
The Repeater operation will be memorized indepen-
dently on each VFO stack of the VFO-A and VFO-B.
The conventional repeater shift used on 29 MHz is 100
kHz, while on the 50 MHz band the shift may vary
between 500 kHz and 1.7 MHz (or more). To program
the proper repeater shift, use Menu items “057 F3E
28 RPT” (28 MHz) and “058 F3E 50 RPT” (50
MHz), as appropriate.
[
MODE
]
Button
[
CLAR/VFO-B
]
Knob
Main Tuning Dial Knob
[
MOX
]
Button
CTCSS Tone Frequency
CTCSS Operation
TN:Tone Encoder
TS:Tone Squelch
OFF:OFF
Repeater Shift Direction
:Minus Shift
+:Plus Shift
S:Simplex
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info