478504
85
Zoom out
Zoom in
Previous page
1/132
Next page
Page 83FT-950 OPERATING MANUAL
MESSAGE MEMORY PROGRAMMING
(
USING YOUR PADDLE
)
1. Set the operating mode to CW.
2. Set the
[
BK-IN
]
button to “Off”.
3. Turn the internal Electronic Keyer “On” by pressing
the
[
KEYER
]
button, if necessary.
4. Press the
[
MEM
]
key on the FH-2. A blinking “
icon will appear in the display.
5. Press any of the FH-2s keys numbered
[
1
]
through
[
5
]
to begin the memory storage process, and the
” icon will glow steadily.
6. Send the desired message using your keyer paddle.
ADVICE:
If you do not start keying within ten seconds, the
memory storage process will be cancelled.
7. Press the
[
MEM
]
key on the FH-2 once more at the
end of your message. Up to 50 characters may be stored
in each of the five memories.
NOTE:
You must exercise care in sending to ensure that the spaces
between letters and words are accurately done; if your tim-
ing is off, the spacing may not come out right in the stored
message. For ease in setting up the keyer memories, we
recommend you set Menu item “037 A1A F-TYPE” and/
or “039 A1A R-TYPE” to “ACS” (Automatic Character
Spacing) while you are programming the keyer memories.
CW CONVENIENCE FEATURES
CONTEST MEMORY KEYER
(
USING THE OPTIONAL FH-2 REMOTE CONTROL KEYPAD
)
LOCK
OFFON
LOCK
OFFON
LOCK
OFFON
CHECKING THE CW MEMORY CONTENTS
1. Be sure that Break-in is still turned “Off” by the
[
BK-IN
]
button.
2. Press the
[
MONI
]
button to enable the CW monitor. A
” icon will appear in the display.
3. Press the FH-2’s
[
1
]
~
[
5
]
key whichever one you just
recorded in. You will hear the results in the sidetone
monitor, but no RF energy will be transmitted.
NOTE:
You may adjust the monitor level using the
[
MONI
]
knob.
ON-THE-AIR CW MESSAGE PLAYBACK
1. Press the
[
BK-IN
]
button to enable transmission. Ei-
ther Full- or Semi-break-in will be engaged, depend-
ing on the setting of Menu item “043 A1A BK-IN”.
2. Press the FH-2’s
[
1
]
~
[
5
]
key, depending on which
CW Memory Register’s message you wish to transmit.
The programmed message will be transmitted on the
air.
NOTE:
If you subsequently decide to use the “Text Memory” tech-
nique for memory storage, please note that a message stored
using keyer paddle input will not be transferred over when
you select “Text Memory technique” on a particular
memory register (the Menu Mode Setting is set to “tyP1”).
LOCK
OFFON
LOCK
OFFON
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info