478504
74
Zoom out
Zoom in
Previous page
1/132
Next page
Page 72 FT-950 OPERATING MANUAL
Full Break-in (QSK) Operation
As shipped from the factory, the FT-950 TX/RX system for CW is configured for “Semi-break-in” operation.
However, using Menu item “043 A1A BK-IN,” you may change this setup for full break-in (QSK) operation, whereby
the switching is quick enough to hear incoming signals in the spaces between the dots and dashes of your transmis-
sion.
USING THE BUILT-IN ELECTRONIC KEYER
CW MODE OPERATION
1. Press the
[
MENU
]
button to engage the Menu.
2. Rotate the
[
SELECT
]
knob to select Menu item
043 A1A BK-IN”.
ADVICE:
Press the
[
SELECT
]
knob momentarily to toggle
the Menu item display between “043 A1A” and
BK-IN”.
3. Rotate the
[
CLAR/VFO-B
]
knob to set this Menu
item to “FuLL”.
4. When your adjustments are complete, press and
hold in the
[
MENU
]
button for one second to save
the new setting and exit to normal operation.
A number of interesting and useful features are available during Electronic Keyer operation.
1. Press the
[
MENU
]
button to enter the Menu mode.
2. Rotate the
[
SELECT
]
knob to select Menu item
046 A1A WEIGHT”.
ADVICE:
Press the
[
SELECT
]
knob momentarily to toggle
the Menu item display between “046 A1A” and
WEIGHT”.
3. Rotate the
[
CLAR/VFO-B
]
knob to set the weight
to the desired value. The available adjustment range
is for a Dot/Dash ratio of 2.5 ~ 4.5 (default value:
3.0).
4. When you are finished, press and hold in the
[
MENU
]
button for one second to save the new
setting and exit to normal operation.
[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
[
SELECT
]
Knob
Setting the Keyer Weight (Dot/Dash) Ratio
This Menu item may be used to adjust the dot/dash ratio for the built-in Electronic Keyer. The default weighting is
3:1 (a dash is three times longer than a dot).
[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
[
SELECT
]
Knob
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info