478504

Yaesu FT-950 Manual

66
Zoom out
Zoom in
Previous page
1/132
Next page
Page 64 FT-950 OPERATING MANUAL
VOICE MEMORY
(
SSB/AM/FM MODES: REQUIRES OPTIONAL DVS-6 VOICE MEMORY UNIT
)
You may utilize the Voice Memory capability of the FT-950 for repetitive messages. The Voice Memory system includes five
memories capable of storing up to 20 seconds of voice audio each. The maximum that any memory can hold is 20 seconds.
Recording Your Own Voice in Memory
1. Select the LSB, USB, AM, or FM mode using the front
panel
[
MODE
]
buttons.
2. Adjust the
[
MIC GAIN
]
knob, as described on page 56.
3. Press and hold the
[
SELECT
]
knob for one second to
activate the Voice Memory Unit. You will see one of
following indications in Multi-Display Window on the
display; “rEC1”, “rEC2”, “rEC3”, “rEC4”, “rEC5”,
“PLY1”, “PLY2”, “PLY3”, “PLY4”, or “PLY5”.
4. Rotate the
[
SELECT
]
knob to recall the Voice Memory
Channel (“rEC1” - “rEC5”) you
wish to record.
5. Press the
[
SELECT
]
knob momentarily. A blinking
“ ” icon will appear in the display.
6. Press the microphone’s PTT switch momentarily. The
“ ” icon will glow steadily and recording will
begin. If you do not press the PTT switch within five
seconds of pressing the
[
SELECT
]
knob, the memory
storage process will be cancelled.
7. Speak into the microphone in a normal voice level to
record the message (such as “CQ DX, CQ DX, this is
W 6 Delta X-Ray Charlie, W 6 Delta X-Ray Charlie,
Over”). Remember that the time limit for recording
any message is 20 seconds.
8. Press the
[
SELECT
]
knob momentarily to terminate
the message storage process.
Checking Your Recording
1. Be sure that the front panel
[
MOX
]
,
[
VOX
]
, and
[
BK-
IN
]
button are “Off” (the LED imbedded in the switch
must be off.)
2. Press and hold the
[
SELECT
]
knob for one second to
activate the Voice Memory Unit. You will see one of
following indications in Multi-Display Window on the
display; “rEC1”, “rEC2”, “rEC3”, “rEC4”, “rEC5”,
“PLY1”, “PLY2”, “PLY3”, “PLY4”, or “PLY5”.
3. Rotate the
[
SELECT
]
knob to recall the Voice Memory
Channel (“PLY1” - “PLY5”) which-
ever one you just recorded in.
4. Press the
[
SELECT
]
knob. The “ ” icon will ap-
pear in the display and you will hear the contents of
the Voice Memory you just recorded.
ADVICE:
You may adjust the playback level of the recording via
Menu item “014 DVS RX LVL”.
TRANSMITTER CONVENIENCE FEATURES
Transmitting the Recorded Message
1. Select the LSB, USB, AM, or FM mode using the front
panel
[
MODE
]
buttons.
2. Press the front panel’s
[
BK-IN
]
button. The “ ”
icon will appear in the display.
3. Press and hold the
[
SELECT
]
knob for one second to
activate the Voice Memory Unit. You will see one of
the following indications in the Multi-Display Window
on the display; “rEC1”, “rEC2”, “rEC3”, “rEC4”,
“rEC5”, “PLY1”, “PLY2”, “PLY3”, “PLY4”, or
“PLY5”.
4. Rotate the
[
SELECT
]
knob to recall the Voice Memory
Channel (“PLY1” - “PLY5”), depending on which
memory message you wish to trans-
mit.
5. Press the
[
SELECT
]
] knob. A “ ” icon will ap-
pear in the display and the message will be transmit-
ted.
ADVICE:
You may adjust the transmit (audio) level of the recording
via Menu item “015 DVS TX LVL”.
[
BK-IN
]
Button
[
SELECT
]
Knob
[
MODE
]
Button
[
SELECT
]
Knob
[
MODE
]
Button
[
SELECT
]
Knob
[
MOX
]
Button
Multi-Display WindowMulti-Display Window
Multi-Display Window
[
VOX
]
Button
[
BK-IN
]
Button
… 66 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info