478504
62
Zoom out
Zoom in
Previous page
1/132
Next page
Page 60 FT-950 OPERATING MANUAL
PARAMETRIC MICROPHONE EQUALIZER
(
SSB/AM/FM MODE
)
The FT-950 includes a unique Three-Band Parametric Microphone Equalizer that provides precise, independent control
over the low, mid and treble ranges in your voice waveform. You may utilize one group of settings when the speech
processor is off and an alternate group of settings when the speech processor is on. The speech processor feature is de-
scribed in the next chapter.
QUICK POINT:
The Parametric Equalizer is a unique technique for adjusting the signal quality. The three audio ranges may be adjusted so
precisely, it is possible to craft an audio response that provides a natural and pleasant sound that you may not have ever
experienced before. Alternately, the Effective “talk power” can be significantly enhanced.
The aspects of configuration that you may adjust on the Parametric Equalizer are:
Center Frequency: The center frequency of each of the three bands may be adjusted.
Gain: The amount of enhancement (or suppression) within each band may be adjusted.
Q: The bandwidth over which the equalization is applied may be adjusted.
Setup of the Parametric Microphone Equalizer
1. Connect the microphone to the MIC jack.
2. Set the RF output power to minimum value via the
Menu item “111 TGEN TX PWR”, so you will not
cause interference to other users while making adjust-
ments.
ADVICE:
We recommend that you connect a dummy load to
one of the Antenna jacks, and monitor your signal
on a separate receiver, to prevent interference to
other users.
You will have the best chance of hearing the ef-
fects of adjustments if you wear headphones (con-
nected to the monitor receiver) while listening to
your transmitted signal.
3. To adjust the Parametric Microphone Equalizer while
the speech processor is disabled, press the
[
PROC
]
button until the “ ” icon appears in the display.
To adjust the Parametric Microphone Equalizer with
the speech processor engaged, press the
[
PROC
]
but-
ton until the “ ” and “ ” icons appear in
the display.
4. Press the
[
MONI
]
button, if you want to listen on the
FT-950s internal monitor.
5. Press the
[
MENU
]
button momentarily. The Menu list
will appear in the display.
6. Rotate the
[
SELECT
]
knob to find the “EQ” Menu
area, containing Menu items “091” through “099”;
these parameters apply to the adjustment of the Para-
metric Microphone Equalizer when the speech proces-
sor is disabled. Menu items “100” through “108” ap-
ply to the adjustment of the Parametric Microphone
Equalizer when the speech processor is engaged.
ADVICE:
If you do not find the Menu item number, press the
[
SELECT
]
knob momentarily to switch the Menu item
name to the Menu item number.
7. Rotate the
[
CLAR/VFO-B
]
knob to perform adjust-
ments to a particular Menu item.
8. Close the PTT switch, and speak into the microphone
while listening to the effect of the changes you are
making. Because the overall effect on the sound will
change with each adjustment, you should make sev-
eral passes through each adjustment area, to be sure
that you are achieving the optimum settings.
9. When you have completed all adjustments, press and
hold in the
[
MENU
]
button for one second to save the
new settings and exit to normal operation. If you only
press the
[
MENU
]
button momentarily to exit, none of
the changes you performed will be stored.
ADVICE:
To roll off excessive bass response in a wide-range studio
microphone, try putting a 10 dB null at 100 Hz with a
bandwidth of “1” or “2”, do about a 3 dB null centered on
800 Hz with a bandwidth of “3,” and then put an 8 dB
peak centered on 2100 Hz with a bandwidth of “1.” These
are starting recommendations; each microphone and users
voice will be different, often requiring different settings.
ENHANCING TRANSMIT SIGNAL QUALITY
[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
[
SELECT
]
Knob
[
PROC
]
Button
[
MONI
]
Button
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info