478504
38
Zoom out
Zoom in
Previous page
1/132
Next page
Page 36 FT-950 OPERATING MANUAL
“MY BANDS” OPERATION
When operating on an Amateur Band, it is possible to use the
[
BAND
]
button to engage the
[
CLAR/VFO-B
]
knob for
Amateur band selection. The “My Bands” feature allows you to skip some Amateur bands, and make only your preferred
bands available for selection via the
[
CLAR/VFO-B
]
knob.
This feature can be very useful in a contest, where the 10/18/24 MHz bands are not used, or if you do not have antennas for
some bands.
CONVENIENCE FEATURES
“My Bands” Setup
1. Press the
[
MENU
]
button to engage the Menu mode.
2. Rotate the
[
SELECT
]
knob to select Menu item “090
TUN MY BAND”.
ADVICE:
Press the
[
SELECT
]
knob to toggle the Menu item
display between “090 TUN” and “MY BAND”.
3. Rotate the
[
CLAR/VFO-B
]
knob to choose a band that
you wish to omit (skip) from the band selection loop
(when using the
[
CLAR/VFO-B
]
knob for band se-
lection). The available choices are 1.8/3.5/5/7/10/14/
18/21/24/28/50/GE (General Band).
4. Press the
[
ENT
]
button to set the command to ON.
The “E” (Enable) notation at the right of the band no-
tation will change to “d” (disable).
5. Repeat steps 3 and 4 to select/deselect as many bands
as you like.
NOTE:
The “ON” command sets the selected band to be
skipped. The “OFF” command sets the selected band
to be included in the band selection list. Change the
d” notation to “E” to restore a previously deleted band
to the band selection list.
6. Press and hold in the
[
MENU
]
button for one second
to lock in the new configuration and exit to normal
operation.
[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
[
SELECT
]
Knob
[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
[
BAND
]
Button
ADVICE:
The “My Band” feature affects both the VFO-A and VFO-
B.
“My Band” Operation
1. Press the
[
BAND
]
button at the left of the
[
CLAR/
VFO-B
]
knob; the imbedded LED will glow orange.
2. Rotate the
[
CLAR/VFO-B
]
knob to choose the Ama-
teur band on which you wish to operate. Only those
Amateur bands that have not been set to “skip” will
appear as you scroll through the bands.
To disable the “My Band” Operation, press the
[
BAND
]
button again; the imbedded orange LED goes out.
ADVICE:
The “My Band” feature affects both the VFO-A and VFO-
B.
14 MHz
14 MHz
18 MHz
50 MHz
21 MHz21 MHz
7 MHz
7 MHz
5 MHz
1.8 MHz
28 MHz
28 MHz
24 MHz
3.5 MHz
3.5 MHz
10 MHz
14 MHz
21 MHz7 MHz
28 MHz3.5 MHz
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-950 in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info