478500

Yaesu FT-897D Manual

18
Zoom out
Zoom in
Previous page
1/76
Next page
Page 16 FT-897D OPERATING MANUAL
FRONT PANEL CONTROL & SWITCHES
Multi Function Row “i”
(
MFi
)
[
MTR, --------, DISP
]
[
A
]
Key: MTR
Pressing the
[
A
](
MTR
)
key repeatedly allows selection of the display function of the meter in the transmit mode.
PWR
➠
ALC
➠
SWR
➠
MOD
➠
PWR
……
The selected function will appear above the
[
B
]
key.
Press and hold in the
[
A
](
MTR
)
key for one second to recall Menu Mode No-062 [MTR PEAK HOLD] (for setting the
“Peak-Hold” function of the meter).
[
B
]
Key
Pressing the
[
B
]
key repeatedly allows selection of the display function of the meter in the transmit mode.
PWR
➠
MOD
➠
SWR
➠
ALC
➠
PWR
……
[
C
]
Key: DISP
Press the
[
C
](
DISP
)
key to switch the display between the Large Character and Small Character modes.

[
A
][
B
][
C
]
Multi Function Row “j”
(
MFj
)
[
SPOT, BK, KYR
]
[
A
]
Key: SPOT
Press the
[
A
](
SPOT
)
key to activate the CW spotting heterodyne oscillator.
[
B
]
Key: BK
Press the
[
B
](
BK
)
key to disable the CW “Semi” break-in operation.
Press and hold in the
[
B
](
BK
)
key for one second to recall Menu Mode No-029
[
CW SIDE TONE
]
(for setting the CW
side tone volume level).
[
C
]
Key: KYR
Press the
[
C
](
KYR
)
key to activate the built-in Electronic Keyer.
Press and hold in the
[
C
](
KYR
)
key for one second to recall Menu Mode No-030
[
CW SPEED
]
(for setting the Keyer
speed).

[
A
][
B
][
C
]

[
A
][
B
][
C
]
Multi Function Row “k”
(
MFk
)
[
TUNE, DOWN, UP
]
[
A
]
Key: TUNE
Press the
[
A
](
TUNE
)
key to activate the optional FC-30 Automatic Antenna Tuner or ATAS-100/-120 Active-Tuning
Antenna System.
Press and hold in the
[
A
](
TUNE
)
key for one second to initiate tuner or antenna retuning.
[
B
]
Key: DOWN
Press and hold in the
[
B
](
DOWN
)
key to lower the ATAS-100/-120 antenna manually.
[
C
]
Key: UP
Press and hold in the
[
C
](
UP
)
key to raise the ATAS-100/-120 antenna manually.

[
A
][
B
][
C
]
Multi Function Row “l”
(
MFl
)
[
NB, AGC, --------
]
[
A
]
Key: NB
Press the
[
A
](
NB
)
key to activate the receiver’s IF Noise Blanker.
Press and hold in the
[
A
](
NB
)
key for one second to recall Menu Mode No-63
[
NB LEVEL
]
(for setting of the NB level).
[
B
]
Key: AGC
Press the
[
B
](
AGC
)
key to disable the receiver’s AGC system. Normally, the AGC should be left On.
[
C
]
Key
Press the
[
C
]
key to select the recovery time (Slow, Fast, or Auto) for the receiver’s AGC system.

[
A
][
B
][
C
]
Multi Function Row “m”
(
MFm
)
[
IPO, ATT, NAR
]
[
A
]
Key: IPO
Press the
[
A
](
IPO
)
key to bypass the receiver preamplifier, thereby activating Intercept Point Optimization for improved
overload characteristics while operating on the HF and 50 MHz bands.
The IPO feature does not function on 144/430 MHz.
[
B
]
Key: ATT
Press the
[
B
](
ATT
)
key to engage the receiver front-end attenuator, which will reduce all signals and noise by approxi-
mately 10 dB.
The ATT feature does not function on 144/430 MHz.
[
C
]
Key: NAR
Press the
[
C
](
NAR
)
key to select the low-deviation mode required for HF FM operation on 29 MHz.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-897D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-897D in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info