36023

Yaesu ft-897D Manual

51
Zoom out
Zoom in
Previous page
1/76
Next page
Page 49FT-897D OPERATING MANUAL
Scan Skip Programming (Memory Mode Only)
Among the memories you have programmed, there may be
some stations which you do not wish to scan. For example,
broadcast signals (which are transmitted continuously) will
cause the scanner to stop, and such channels may be skipped
so as to avoid this inconvenience.
To remove a channel from the scanning loop:
1. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“b”
[
MW, SKIP, TAG
]
appears on the display.
2. Recall the memory channel to be skipped.
3. Press the
[
B
](
SKIP
)
key momentarily. The “hyphen” in
the memory channel number will change to become a
“dot;” this shows that this channel now is not included
in the scanning loop.
“PRIORITY CHANNEL” SCANNING
The FT-897D’s scanning features include a two-channel
scanning capability which allows you to operate on a VFO
or Memory channel, while periodically checking a Memory
Channel “M-001” for activity. If a station is received on the
Memory Channel “M-001” which is strong enough to open
the Squelch, the scanner will pause on that station in accor-
dance with the Scan-Resume mode set via Menu Mode No-
078
[
SCAN RESUME
]
. See page 62.
Here is the procedure for activating Priority Channel Dual
Watch operation:
1. Rotate the SQL control until the background noise is
just silenced, then store the frequency to be the “Prior-
ity” channel into the Memory Channel “M-001.”
2. Set the FT-897D for operation on another memory chan-
nel, or on a VFO frequency.
3. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“g”
[
SCN, PRI, DW
]
appears on the display.
4. Press the
[
B
](
PRI
)
key momentarily to start the “Prior-
ity” monitoring (the “ ” icon will appear at the upper of
the frequency display). During Priority monitoring, the
displayed frequency will shift to the
Priority memory briefly about five
seconds, while the receiver check for
the presence of a signal.
5. When no signal appears on the Priority memory (i.e. the
squelch remains closed), you can tune, transmit and re-
ceive on the VFO, or select and operate on other memo-
ries.
6. If a station you wish to talk with appears on the Priority
channel, press the PTT switch momentarily while re-
ceiving their signal (no transmission will occur) to halt
Priority scanning. Otherwise, when a signal appears on
the Priority channel, Priority monitoring will just pause
on the channel. Priority monitoring will resume.
7. To cancel Priority monitoring, press again the
[
B
](
PRI
)
key.
SCANNING OPERATION
4. Repeat steps 2 and 3 as many times as necessary to skip
all the channels you do not wish to scan.
5. Initiate memory scanning; you will observe that the chan-
nels you marked to be skipped are not included in the
scanning loop.
6. Press the PTT switch to stop the scan; you may now use
the MEM/VFO CH knob to step through the channels
manually - one at a time - and you will observe that the
“Skipped” channels are, nonetheless, available for re-
call by manual means.
7. You may restore a previously-skipped channel to the
scanning loop by selecting the channel manually, then
pressing the
[
B
](
SKIP
)
key momentarily so that the “dot”
changes to become a “hyphen.”
Memory Skip “OFF” Memory Skip “ON”
SCANNING FEATURES
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu ft-897D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu ft-897D in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info