36023

Yaesu ft-897D Manual

48
Zoom out
Zoom in
Previous page
1/76
Next page
Page 46 FT-897D OPERATING MANUAL
MEMORY OPERATION ON “HOME”
CHANNEL MEMORIES
Four Special one-touch “Home” channels are available, for
special frequencies you use often. Either “simplex” or “split”
frequency/mode data may be stored in the “Home” channel
locations. Special “Home” channels are available for HF
(any frequency between 1.8 and 29.7 MHz), 50 MHz, 144
MHz, and 430 MHz.
These memories may prove particularly useful for monitor-
ing propagation beacons, providing one-touch recall of the
beacon frequency for a quick check of band conditions.
HOME Channel Storage
1. Tune the desired frequency, and set the operating mode.
If this is an FM channel, set up any required CTCSS/
DCS and repeater shift configurations.
2. Press the
[
F
]
key momentarily, then rotate the MEM/
VFO CH knob, as needed, until Multi Function Row
“b”
[
MW, SKIP, TAG
]
appears on the display.
3. Press the
[
A
](
MW
)
key momentarily to enter the
“Memory Check” mode.
4. Press and hold in the HOME key for one second. This
stores the frequency data into the “Home” channel loca-
tion. As usual, you will hear a double beep to confirm
the successful storage of the frequency data.
5. If you wish to store a “Split” frequency pair into the
“Home” channel, store the Receive frequency as in steps
1 ~ 4 above. Now set the desired Transmit frequency.
Once more, press the
[
A
](
MW
)
key momentarily. Press
and hold in the microphone’s PTT switch; while hold-
ing the PTT switch, again press and hold in the HOME
key for one second. This stores the transmit frequency
data into the “Home” channel location.
HOME Channel Recall
1. Press the HOME key momentarily to recall the Home
Channel on the band group where you currently are op-
erating (HF, 50 MHz, 144 MHz, or 430 MHz). The
“HOME” indication will appear on the display.
2. Press the HOME key once more to return to the previ-
ously-used frequency (either a VFO frequency or a
memory channel).
LABELING MEMORIES
You may wish to append an alpha-numeric “Tag” (label) to
a memory or memories, to aid in recollection of the channel’s
intended use (such as a club name, etc.). This is easily ac-
complished using the Menu mode.
1. Recall the memory channel onto which you wish to ap-
pended a label.
2. Press and hold in the
[
F
]
key for one second to enter the
Menu mode.
3. Rotate the MEM/VFO CH knob to recall Menu Mode
No-056
[
MEM TAG
]
.
4. Press the MEM/VFO CH knob to enable the program-
ming of the label.
5. Rotate the DIAL knob to select the first character (as
shown below) in the name you with to store, then rotate
the MEM/VFO CH knob clockwise to move to the next
character.
6. Again rotate the DIAL knob to select the next number,
letter, or symbol, then rotate the MEM/VFO CH knob
clockwise to move to the next character’s slot.
7. Repeat step 6 as many times as necessary to complete
the name tag for the memory, then press and hold in the
[
F
]
key for one second to save the A/N (Alpha-Numeric)
name entry and exit to normal operation.
8. During Memory operation, press the
[
F
]
key momen-
tarily, then rotate the MEM/VFO CH knob, as needed,
until Multi Function Row “b”
[
MW, SKIP, TAG
]
appears
on the display. Press the
[
C
](
TAG
)
key momentarily to
activate the alpha-numeric Tag. Repeatedly pressing this
key will toggle operation between “Frequency” display
and “Tag” display.
MEMORY OPERATION
“Frequency” Display “Tag” Display
You can recall Menu Mode No-056 [MEM
TAG] instantly by pressing and holding in the
[C](TAG) key for one second.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu ft-897D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu ft-897D in the language / languages: English as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info