35966
66
Zoom out
Zoom in
Previous page
1/72
Next page
Page 64 FT-897 OPERATING MANUAL
OPTIONAL FILTERS:YF-122S AND YF-122C
INSTALLATION OF OPTIONAL ACCESSORIES
1. Turn the transceiver’s power off by pressing and hold-
ing in the PWR switch for one second, then disconnect
the DC cable from the INPUT jack on the rear panel of
the transceiver, when operating the FT-897 with a DC
power supply or optional FP-30 AC power supply.
2. Referring to Figure 1, remove the eight screws affixing
the top cover of the transceiver then disconnect the
speakers connector from the MAIN Unit.
3. Fold the top cover centering around the carrying hand
side from the main chassis.
4. Refer to Figure 2 for the mounting locations for the op-
tional filters. Position the filter so that its connectors are
aligned with the mounting pins on the board, and push it
into place (these slots does not distinction for the in-
stalled filter).
5. Replace the top cover and its eight screws (remember to
replace the internal speakers plug), then connect the DC
cable to the INPUT jack when operating the FT-897
with a DC power supply or optional FP-30 AC power
supply.
8. Filter installation is now complete.
To use the optional filter, press the
[
B
]
(2.3 or 500) key (in
Multi Function Row “n” [CFIL, 2.3 or 500, 2.3 or 500]) to
activate the optional filter which is installed in the “FIL-1”
slot. Press the
[
C
]
(2.3 or 500) key (in Multi Function Row
“n” [CFIL, 2.3 or 500, 2.3 or 500]) to activate the optional
filter which is installed in the “FIL-2” slot.
Note: If you wish to use the optional filter for the TX IF
filter while operating in the SSB mode, change the setting
of Menu Mode No-086
[
TX IF FILTER
]
to “FIL1” or “FIL2
(the slot into which you installed the optional YF-122S fil-
ter).
FIL 2
Figure 1 Figure 2
Optional Filter
MAIN unit
FIL 1
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-897 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-897 in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-897

Yaesu FT-897 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info