35966
58
Zoom out
Zoom in
Previous page
1/72
Next page
Page 56 FT-897 OPERATING MANUAL
MENU MODE No-030
[
CW SPEED
]
Function: Sets the sending speed for the built-in Electronic
keyer.
Available Values: 4wpm ~ 60 wpm (1wpm/step)/20cpm ~
300 cpm (5cpm/step)
Default: 12 wpm (60 cpm)
You can set the sending speed according to either of two
units of speed (wpm: words per minute; cpm: characters
per minute)
To switch units between “wpm” and “cpm,” just press the
MEM/VFO CH knob.
MENU MODE No031
[
CW TRAINING
]
Function: Sends random Morse Code five-character groups
via the sidetone.
Available Values: N / A / AN
Default: N
N: Numeric characters only
A: Alphabet characters only
AN: Numeric and Alphabet characters (Mixed)
MENU MODE No032
[
CW WEIGHT
]
Function: Sets the Dot:Dash ratio for the built-in electronic
keyer.
Available Values: 1:2.5 ~ 1:4.5
Default: 1:3.0
MENU MODE No-033
[
DCS CODE
]
Function: Setting of the DCS code.
Available Values: 104 Standard DCS codes
Default: 023
You can set the DSC codes for Encode and Decode sepa-
rately.
To switch between “ENCODE” and “DECODE,” just press
the MEM/VFO CH knob.
MENU MODE No034
[
DCS INV
]
Function: Selects “Normal” or “Inverted” DCS coding.
Available Values: Tn-Rn/Tn-Riv/Tiv-Rn/Tiv-Riv
Default: Tn-Rn
“n” = “normal”
“iv” = “inverted”
MENU MODE No-035
[
DIAL STEP
]
Function: Setting of the DIAL knob’s tuning speed.
Available Values: FINE/COARSE
Default: FINE
You may choose between two speeds for the DIAL knob.
Selecting “COARSE” doubles the tuning rate compared to
the default value.
FINE: 10 Hz/step @SSB/CW mode, 100 Hz/step @AM/
FM
COARSE: 20 Hz/step @SSB/CW mode, 200 Hz/step @AM/
FM
MENU MODE No036
[
DIG DISP
]
Function: Defines the displayed frequency offset during
DIG (USER-L or USER-U) mode operation.
Available Values: –3000 ~ +3000 Hz
Default: 0 Hz
MENU MODE No037
[
DIG GAIN
]
Function: Adjusts the audio input level from terminal equip-
ment (such as a TNC or PSK-31 sound card) during DIG
(Digital) mode operation.
Available Values: 0 ~ 100
Default: 50
MENU MODE No038
[
DIG MODE
]
Function: Selects the mode and sideband (if applicable) in
the DIG (Digital) mode.
Available Values: RTTY-L/RTTY-U/PSK31-L/PSK31-U/
USER-L/USER-U
Default: RTTY-L
RTTY-L: AFSK RTTY operation on the LSB mode
RTTY-U: AFSK RTTY operation on the USB mode
PSK31-L: PSK-31 operation on the LSB mode
PSK31-U: PSK-31 operation on the USB mode
USER-L: User-programmed costume operation based on
LSB mode
USER-U: User-programmed costume operation based on
USB mode
In the USER-L and USER-U modes, you can
define the display frequency offset and carrier
frequency offset by Menu Mode No-036 [DIG
DISP] and No-039 [DIG SHIFT].
MENU MODE No039
[
DIG SHIFT
]
Function: Defines the carrier frequency offset during DIG
(USER-L or USER-U) mode operation.
Available Values: –3000 ~ +3000 Hz
Default: 0 Hz
MENU MODE No040
[
DIG VOX
]
Function: Sets the gain of the VOX circuitry’s input level
for the DIG mode.
Available Values: 0 ~ 100
Default: 0
Note: When you wish to use “DIG VOX,” press the [F] key
momentarily, then rotate the MEM/VFO CH knob, until you
reach Multi Function Row “d” [RPT, REV, VOX], then press
the [C](VOX) key. The parentheses and icon will dis-
appear, signifying that the (SSB/AM/FM voice) VOX sys-
tem has been turned off. Despite these indicators having
disappeared, the Digital Mode “VOX” system will still be
active, allowing audio input from a TNC or sound card to
engage the transmitter.
MENU MODE No-041
[
DISP COLOR
]
Function: Selects the illumination color for each operating
status.
Available Values: ARTS/BAND/FIX/MEMGRP/MODE/
MTR/VFO
Default: FIX
MENU MODE No-042
[
DISP CONTRAST
]
Function: Setting of the display contrast level.
Available Values: 1 ~ 13
Default: 5
MENU OPERATION
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-897 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-897 in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-897

Yaesu FT-897 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info