35966
15
Zoom out
Zoom in
Previous page
1/72
Next page
Page 13FT-897 OPERATING MANUAL
FRONT PANEL CONTROL & SWITCHES
CLAR Knob
This knob tunes the clarifier offset frequency up to ±9.99
kHz, when the Receiver Clarifier feature is activated by
pressing the CLAR/IF SHIFT key.
BAND
(
DWN
)
/BAND
(
UP
)
Key
Pressing either of these keys momentarily will cause the
frequency to be moved up or down by one frequency
band. The selections available are:
…1.8 MHz 3.5 MHz 7.0 MHz 10 MHz
14 MHz 15 MHz 18 MHz 24 MHz
28 MHz 50 MHz 88 MHz 108
MHz 144 MHz 430 MHz 1.8 MHz …
MEM/VFO CH Knob
This detented rotary switch is used for VFO frequency
tuning, memory selection, and function selection for the
[
A
]
,
[
B
]
,
[
C
]
keys of the transceiver.
DSP Button
Pressing this button momentarily provides instant access
to Multi Function Row “p” (MFp), which contains the
command key for the receivers Digital Signal Process-
ing system. The available functions will appear as the
functions displayed above the
[
A
]
,
[
B
]
, and
[
C
]
keys, as
described previously.
HOME Key
Pressing this key momentarily recalls a favorite “Home”
frequency memory.
V/M Key
Pressing this key switches frequency control between the
VFO and Memory Systems.
MODE
(
)
/MODE
(
)
Key
Pressing either of these keys momentarily will change
the operating mode. The selections available are:
… USB LSB CW CWR
AM DIG PKT USB …
DSP Indicator
This indicator glows green when the DSP feature is acti-
vated.
TRANSMIT/BUSY Indicator
This indicator glows green when the squelch opens, and
turns red during transmit.
CW-T Indicator
This indicator is a visual tinning indicator for CW re-
ception, which glows green in synchronization with a
signal tuned to the center of the IF passband during CW
reception.
BATT-A, BATT-B Indicator
These LEDs indicate the battery status for the optional
FNB-78 Ni-MH battery pack while internal battery op-
eration.
The LED glows green when the battery pack is waiting
(switch to off by the A-B switch on the top panel), and
turns orange when the is the battery pack en the radio
operate the corresponded battery pack by the A-B switch
on the top panel.
When the battery voltage is approaching the value which
indicates depletion is near, the LED blinks orange, indi-
cating it is time to replace the batteries.
Supply Voltage
Meter Status
: S meter
: PO meter
: Modulation Meter
: SWR Meter
: ALC Meter
Multi Function Key Status
: Key Lock “ON”
/ : Fast Tuning Step
Operating Frequency
: IPO Active
: ATT Active
: VOX Active
: Priority Active
: Dual Receive Active
DCS Active
Operating Mode
APO Active
: ATAS-100/-120 or FC-30 Active
: HI SWR (more the “3.0”)
: HI Temperature
: IF SHIFT Active
: Clarifier Active
Transverter Mode
CTCSS/DCS Status
: CTCSS ENC Active (Split Tone “ON”)
: CTCSS ENC Active (Split Tone “OFF”)
: CTCSS ENC/DCS DEC Active (Split Tone “ON”)
: CTCSS ENC/DEC (Tone Squelch) Active (Split Tone “ON”)
: DCS ENC Active (Split Tone “ON”)
: DCS ENC Active (Split Tone “OFF”)
: DCS ENC/DEC Active (Split Tone “ON”)
: DCS ENC/CTCSS DEC Active (Split Tone “ON”)
: CTCSS ENC/DEC (Tone Squelch) Active (Split Tone “OFF”)
: DCS ENC/DEC Active (Split Tone “OFF”)
: Odd Split
: Minus Shift
: Plus Shift
VFO A/B or
Memory CH Number
Battery Operation
LCD Details
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-897 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-897 in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-897

Yaesu FT-897 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info