674739
37
Zoom out
Zoom in
Previous page
1/62
Next page
35FT-891 Operating Manual
Operating Instructions 4
Meters
The following function information can be displayed on the meter in the transmit mode.
: Displays transmitter output power
: Displays ALC voltage
: Displays Standing Wave Ratio
: Displays the speech processor compression level
: Displays the drain current of the final stage FET transistors
1. Press the
[
F
]
key repeatedly to find the “FUNCTION-2” list screen.
2. Rotate the
MULTI function knob to select the “MTR”.
3. Press the
MULTI function knob to activate the meters function.
4. When the Meter information screen is appeared, rotate and press the
MULTI func-
tion knob to select the desired information.
When the desired information is set, the display will return to “FUNCTION-2” list screen
automatically.
5. Press and hold the
[
F
]
key, or rotate the
MAIN DIAL, to return to normal oper-
ation.
VOX
The VOX
(
Voice Operated Xmit
)
circuit will engage the transmitter automatically when
you speak into the microphone.
Press the
[
F
]
key to find the “FUNCTION-1” list screen.
à
Rotate the
MULTI function
knob to select “VOX”.
à
Press the
MULTI function knob to switch “VOX” ON or OFF.
Speech Processor
The Speech Processor increases the average power output while operating in the SSB
mode. Press the
[
F
]
key repeatedly to find the “FUNCTION-1” list screen.
à
Rotate the
MULTI function knob to select “PRC”.
à
Press the
MULTI function knob to display
the compression level pop-up screen.
à
Rotate the
MULTI function knob to adjust the
compression level.
Parametric Microphone Equalizer
In the SSB and AM transmit modes, the Three-Band Parametric Microphone Equalizer
may be used to provide precise, independent control over the low, mid and treble frequency
ranges in the voice waveform. Press the
[
F
]
key repeatedly to find the “FUNCTION-2”
list screen.
à
Rotate the
MULTI function knob to select “MEQ”.
à
Press the
MULTI
function knob to switch the microphone equalizer ON or OFF.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-891 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-891 in the language / languages: English as an attachment in your email.

The manual is 20,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info