674739
20
Zoom out
Zoom in
Previous page
1/62
Next page
18
Front Panel Controls & Switches
FT-891 Operating Manual
[
BAND
(
MODE
)]
key
Press this key to display the “BAND SELECT” screen
(
Operating band selection
screen
)
.
Rotate the
MAIN DIAL knob to select the desired frequency band
(
operating
band
)
.
The selected frequency band will be set automatically in one second and the display
will return to normal operation.
Press and hold this key to display the “MODE SELECT” screen.
Rotate the
MAIN DIAL knob to select the radio modulation form
(
operating
mode
)
.
The selected operating mode will be set automatically in one second and the dis-
play will return to normal operation in the selected operating mode.
(
The mode is
automatically preset for each operating band, it is only necessary to set “MODE
SELECT” when a change is desired
)
.
[
A/B
]
key
Pressing this key momentarily, exchanges the frequency and memory channel data
of VFO-A and VFO-B.
Press and hold this key for one second to set VFO-A and VFO-B to the same frequen-
cy and data values.
[
V/M
]
key
This key toggles frequency control between the VFO and the memory systems.
When the memory channel data is recalled, the previously selected Memory channel
number is displayed like “
”.
Rotate the
MULTI function knob to change the memory channel number.
While operating on a memory channel, if the
MAIN DIAL knob is turned, the
“Memory Channel Number” will be replaced by the MEMORY TUNE indicator “ ”;
this indicates that the operating frequency of the Memory Channel is temporarily
changed. Pressing the
[
V/M
]
key while in the MEMORY TUNE state will restore the
previous memory channel data.
[
V
u
M
]
key
This key is used to save the data from VFO-A to a memory channel.
Press this key to display the “MEMORY CHANNEL” list screen.
Rotate the
MULTI function knob to select the desired memory channel.
Press this key again to copy the VFO-A operating data to the selected memory
channel.
When the “MEMORY CHANNEL” list screen is displayed, press the
[
A
]
/
[
B
]
/
[
C
]
key to edit the selected memory channel.
[
M
u
V
]
key
This key will copy the saved data from a written memory channel to VFO-A.
Press this key to display the “MEMORY CHANNEL” list screen.
Rotate the
MULTI function knob to select the desired previously written memory
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-891 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-891 in the language / languages: English as an attachment in your email.

The manual is 20,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info