478467
60
Zoom out
Zoom in
Previous page
1/72
Next page
58 FT-8800R Operating Manual
You can transfer all data stored in one FT-8800R to another FT-8800R by utilizing the
handy “Cloning” feature. This requires a user-constructed Cloning cable which connects
the DATA jacks on the two transceivers, as shown below.
To clone from one transceiver to another, use the following procedure:
1. Insert the Cloning Cable into the DATA jack of each transceiver.
2. Turn both transceivers off, then press and hold in the “left
[
V/M
]
key on each radio
while turning the power on again.
3. Rotate the “rightDIAL knob on each radio to select (
CLONE STARTCLONE START
CLONE STARTCLONE START
CLONE START), then press the
[
SET
]
key. The display will disappear for a moment, then the “
CLONECLONE
CLONECLONE
CLONE” notation will
appear on the display.
4. On the “destination” radio, press the “left
[
LOW
]
key. The “
CLONE -RX-CLONE -RX-
CLONE -RX-CLONE -RX-
CLONE -RX-” indicator
will appear on the display.
5. Now, on the “source” radio, press the “left”
[
V/M
]
key. The “
CLONE -TX-CLONE -TX-
CLONE -TX-CLONE -TX-
CLONE -TX-” indicator will
appear on the display, and the cloning data transfer will immediately begin.
6. If there is a problem during the cloning process, “
CLONE ERRORCLONE ERROR
CLONE ERRORCLONE ERROR
CLONE ERROR” will be displayed.
Check your cable connections, and try again.
7. If cloning was successful, the “
CLONE -RX-CLONE -RX-
CLONE -RX-CLONE -RX-
CLONE -RX-” and “
CLONE -TX-CLONE -TX-
CLONE -TX-CLONE -TX-
CLONE -TX-” indicators will disap-
pear.
8. Turn both transceivers off, then remove the Cloning Cable. Channel and operating data
for both radios are now identical. They both may be turned on now for normal opera-
tion.
13.8VDC
ANT
EXT SP
DATA
13.8VDC
ANT
EXT SP
DATA
PKS
GND
CLONING
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-8800R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-8800R in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info