478467
55
Zoom out
Zoom in
Previous page
1/72
Next page
53FT-8800R Operating Manual
PROGRAMMING THE KEY ASSIGNMENTS
Default FT-8800R key functions have been assigned to Microphone’s
[
P1
]
/
[
P2
]
/
[
P3
]
/
[
P4
]
buttons
(
MH-48A6J,
[
ACC
]
/
[
P
]
/
[
P1
]
/
[
P2
]
buttons: MH-42B6JS
)
at the factory. These
may be changed by the user, if you wish to utilize another function on one of these keys.
To program the function assigned to a key:
1. Press the
[
SET
]
key momentarily to enter the Set mode.
2. Rotate the “Main” band DIAL knob to select the Menu Item to be configured (“#28
PGPG
PGPG
PG
P1P1
P1P1
P1,” “#29
PG P2PG P2
PG P2PG P2
PG P2,” “#30
PG P3PG P3
PG P3PG P3
PG P3,” or “#31
PG P4PG P4
PG P4PG P4
PG P4”).
3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL knob to
select the function you wish to assign to the button you selected in the previous step.
4. Press the
[
SET
]
key to save the new setting, then rotate the “Main” band DIAL knob to
select another programmable button to modify, if desired, and repeat the above steps.
5. Press and hold in the “Main” band DIAL knob for 1/2 second to exit to normal operation.
MISCELLANEOUS SETTINGS
Press and hold the button
When the “Main” band is set to the Memory
mode, press and hold in this button for 1/2 sec-
ond to shift to the “Memory Tuning” feature.
Opens the Squelch on the “Main” band to al-
low un-muted reception.
Activates 1750 Hz Tone Burst.
When the “Main” band is set to the Memory
mode or Home Channel, press and hold in this
button for 1/2 second to switch the memory
channel display between the “Frequency” for-
mat and “Alpha-numeric Tag” format.
Allows tuning in 10-MHz step on the “Main
band VFO.
Press this button momentarily to selects Re-
peater Shift direction on the “Main” band.
Activate the Priority Scanning.
Switches operating band on the “Main” band.
Activate the Smart Search Feature when the
Main” band is set to the VFO mode.
Activate the “Memory Bank” feature when the
Main” band is set to the Memory mode.
Function
SCANSCAN
SCANSCAN
SCAN
SQL.OFFSQL.OFF
SQL.OFFSQL.OFF
SQL.OFF
TCALLTCALL
TCALLTCALL
TCALL
RPTRRPTR
RPTRRPTR
RPTR
PRIPRI
PRIPRI
PRI
LOWLOW
LOWLOW
LOW
TONETONE
TONETONE
TONE
MHzMHz
MHzMHz
MHz
REVREV
REVREV
REV
HOMEHOME
HOMEHOME
HOME
BANDBAND
BANDBAND
BAND
VFOVFO
VFOVFO
VFO/
MRMR
MRMR
MR
Press the button
Activate the Scanner on the “Main” band.
Opens the Squelch on the “Main” band to
allow un-muted reception.
Activates 1750 Hz Tone Burst.
Selects Repeater Shift direction on the
Main” band.
Activates the Priority feature on the “Main
band.
Selects the transmit power output level on the
Main” band.
Activates the CTCSS or DCS operation on
the “Main” band.
Allows tuning in 1-MHz step on the “Main
band VFO.
Reverses the transmit and receive frequencies
during split-frequency operation.
Switches operation to the “Home” channel on
the “Main” band.
Toggles the “Main” band of operation
between the “Left” band and “right” band.
Switches frequency control between the VFO
and Memory modes on the “Main” band.
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-8800R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-8800R in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info