478467
42
Zoom out
Zoom in
Previous page
1/72
Next page
40 FT-8800R Operating Manual
MEMORY SCANNING
Memory scanning is similarly easy to initiate:
1. Set the radio to the Memory mode by pressing the
[
V/M
]
key, if necessary.
2. Press the
[
SCN
]
key to initiate scanning.
3. As with VFO scanning, the scanner will halt on any signal encountered that is strong
enough to open the squelch; it will then resume scanning according to the Scan-Resume
mode set previously.
4. To cancel scanning, press the
[
SCN
]
key again (or press the microphone’s PTT key).
How to Skip (Omit) a Channel During Memory Scan Operation
Some continuous-carrier stations like a Weather Broadcast station will seriously impede
scanner operation if you are using the “Carrier Drop” Scan-Resume mode, as the incoming
signal will not pause long enough for the transceiver to resume scanning. Such channels
may be “Skipped” during scanning, if you like:
1. Set the radio to the Memory Mode by pressing the
[
V/M
]
key, if necessary.
2. Rotate the DIAL knob to select the Memory Channel to be skipped during scanning.
3. Set the band which is selected Memory Channel to be skipped to the “Main” band by
pressing the DIAL knob.
4. Press the
[
SET
]
key momentarily to enter the set mode.
5. Rotate the “Main” band DIAL knob to select Menu #37 (
SKP.MSMSKP.MSM
SKP.MSMSKP.MSM
SKP.MSM).
6. Press the “Main”" band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to “
SKIPSKIP
SKIPSKIP
SKIP.” The current Memory Channel will now be ignored during scanning.
The small “SKIP” icon will also appear when you recall the “skipped” memory channel
manually.
The “
MSMMSM
MSMMSM
MSM” selection is used for “Preferential Memory Scan,” described in
the next column.
7. To re-institute a channel into the scanning loop, select “
OFFOFF
OFFOFF
OFF” in step 5 above (the
“Skipped” channel will, of course, still be accessible via manual channel selection meth-
ods using the DIAL knob in the MR mode, whether or not it is locked out of the scan-
ning loop).
SCANNING
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-8800R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-8800R in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info