478467
26
Zoom out
Zoom in
Previous page
1/72
Next page
24 FT-8800R Operating Manual
LOCK FEATURE
In order to prevent accidental frequency change, the panel switches and DIAL knobs may
be locked out.
To activate the Lock feature:
1. Press the
[
SET
]
key momentarily to enter the Set mode.
2. Rotate the “Main” band DIAL knob to select Menu #21 (
LOCKLOCK
LOCKLOCK
LOCK).
3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to change the setting to “
ONON
ONON
ON.”
4. Press the
[
SET
]
key momentarily to save the new setting and exit to normal operation.
5. To unlock the panel switches and DIAL knobs, select “
OFFOFF
OFFOFF
OFF” in step 3 above.
KEYBOARD BEEPER
A key/button beeper provides useful audible feedback whenever a key/button is pressed.
If you want to turn the beep off:
1. Press the
[
SET
]
key momentarily to enter the Set mode.
2. Rotate the “Main” band DIAL knob to select Menu #5 (
BEEPBEEP
BEEPBEEP
BEEP).
3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to change the setting to “
OFFOFF
OFFOFF
OFF.”
4. Press and hold in the “Main” band DIAL knob for 1/2 second to save the new setting
and exit to normal operation.
5. To back on again the beep, select “
ONON
ONON
ON” in step 3 above.
CHANNEL STEP SELECTION
The FT-8800Rs synthesizer provides the option of utilizing channel steps of 5/10/12.5/
15/20/25/50 kHz per step, any number of which may be important to your operating re-
quirements. The FT-8800R is set up at the factory with different default steps on each
operating band which probably are satisfactory for most operation. However, if you need to
change the channel step increments, the procedure to do so is very easy; remember to get
set up on the desired band before making any changes, as different steps may be programmed
for each operating band.
1. Press the
[
SET
]
key momentarily to enter the Set mode.
2. Rotate the “Main” band DIAL knob to select Menu #38 (
STEPSTEP
STEPSTEP
STEP).
3. Press the “Main” band DIAL knob momentarily, then rotate the “Main” band DIAL
knob to select the new channel step size.
4. Press and hold in the “Main” band DIAL knob for 1/2 second to save the new setting
and exit to normal operation.
ADVANCED OPERATION
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-8800R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-8800R in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info