478467

Yaesu FT-8800R Manual

16
Zoom out
Zoom in
Previous page
1/72
Next page
14 FT-8800R Operating Manual
6
“Right” Side Keys
The “right” side
([
LOW
]
,
[
V/M
]
,
[
HM
]
, and
[
SCN
])
keys may be set to either
of two function sets via Menu #20 (
KEY.MODKEY.MOD
KEY.MODKEY.MOD
KEY.MOD). See page 63 for the setup proce-
dure.
[
LOW
]
Key
([
MHz
]
Key
)
Key Mode “1”
([
LOW
]
Key: Default
)
Press this key momentarily to select the transmitter power output level of the “right”
band (“LOW,” “MID2,” “MID1,” or “HIGH”).
When the “right” band is set to the Memory mode or Home Channel, press and hold in
this key for 1/2 second to switch the memory channel display between the “Frequency”
format and the “Alpha-numeric Tag” format.
Key Mode “2”
([
MHz
]
Key
)
Press this key momentarily to allow tuning in 1-MHz steps on the “Main” band VFO.
Press and hold in this key for 1/2 second to allow tuning in 10-MHz steps on the “Main”
band VFO.
[
V/M
]
Key
([
REV
]
Key
)
Key Mode “1”
([
V/M
]
Key: Default
)
Press this key momentarily to switch the frequency control for the “right” band be-
tween the VFO and Memory Systems.
When the “right” band is set to the VFO mode, press and hold in this for 1/2 second to
activate the Smart Search Feature.
When the “right” band is set to the Memory mode, press and hold in this key for 1/2
second to activates the “Memory Bank” feature.
Key Mode “2”
([
REV
]
Key
)
Press this key momentarily to reverse the transmit and receive frequencies on the “Main”
band during split-frequency (i.e. “Repeater”) operation.
Press and hold in this key for 1/2 second to change the frequency shift direction: RPT
– (minus shift), RPT + (plus shift), or RPT OFF (simplex).
[
HM
]
Key
([
TONE
]
Key
)
Key Mode “1”
([
HM
]
Key: Default
)
Press this key momentarily to recall a favorite “Home” frequency memory.
Press and hold in this for 1/2 second to activate Priority Channel Scanning.
Key Mode “2”
([
TONE
]
Key
)
Press this key momentarily to change the Tone Squelch mode: ENC (CTCSS Encoder),
ENC.DEC (CTCSS Tone Squelch), or DCS (DCS) operation.
FRONT PANEL CONTROLS & SWITCHES
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-8800R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-8800R in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info