478467
12
Zoom out
Zoom in
Previous page
1/72
Next page
10 FT-8800R Operating Manual
BASE STATION INSTALLATION
The FT-8800R is ideal for base station use as well as in mobile installations. The FT-
8800R is specifically designed to integrate into your station easily, using the information
to follow as a reference.
AC Power Supplies
Operation of the FT-8800R from an AC line requires a power source capable of providing
at least 15 Amps continuously at 13.8 Volts DC. The FP-1023 and FP-1030A AC Power
Supplies are available from your Yaesu dealer to satisfy these requirements. Other well-
regulated power supplies may be used, as well, if they meet the above voltage and current
specifications.
Use the DC power cable supplied with your transceiver for making power connections to
the power supply. Connect the RED power cable lead to the POSITIVE (+) power supply
terminal, and connect the BLACK power cable lead to the NEGATIVE (–) power supply
terminal.
Packet Radio Terminal Node Controller (TNC)
The FT-8800R provides a convenient rear-panel DATA jack for easy connections to your
TNC. This connector is a standard mini-DIN connector. A pre-wired connector and cable
assembly option, model CT-39A, is available from your local Yaesu dealer.
The FT-8800R’s DATA jack connections are optimized for the data transmission and re-
ception speed in use. In accordance with industry standards, the signal levels, impedances,
and bandwidths are significantly different on 9600 bps as opposed to 1200 bps. If your
TNC does not provide multiple lines to accommodate such optimization, you may still be
able to utilize your TNC, if it is designed for multiple-radio use, by connecting the TNC
“Radio 1” port to the 1200 bps lines on the FT-8800R, and the “Radio 2” port to the 9600
bps lines.
The pin connections of the Data connector are shown below.
INSTALLATION
Pin
1
2
3
4
5
6
Label
PKD
(
DATA IN
)
GND
PTT
RX9600
RX1200
SQL
Note
Packet Data Input
Impedance: 10 k,
Maximum Input Level: 40 mV p-p for 1200 bps
2.0 Vp-p for 9600 bps
Signal Ground
Gound to Transmit
9600 bps Packet Data Output
Impedance: 10 k, Maximum Output: 500 mV p-p
1200 bps Packet Data Output
Impedance: 10 k, Maximum Output: 300 mV p-p
Squelch Control
Squelch Open: +5 V, Squelch Close: 0 V
CT-39A Wire Color
Brown
Red
Orange
Yellow
Green
Blue
DATA Jack Pin Out
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-8800R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-8800R in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info