478499
109
Zoom out
Zoom in
Previous page
1/132
Next page
107FT-857D Operating Manual
MENU MODE No•057
[
MEM/VFO DIAL MODE
]
Function: Selects the function which is engaged when you press the SELECT knob thereby
activating its “secondary” function).
Available Values: CW SIDETONE, CW SPEED, MHz/MEM GRP, MIC GAIN, NB
LEVEL, RF POWER/STEP
Default: MHz/MEM GRP
MENU MODE No•058
[
MIC SCAN
]
Function: Enables/disables scanning access via the microphone’s
[
UP
]
/
[
DWN
]
keys.
Available Values: OFF/ON
Default: ON
MENU MODE No•059
[
MIC SEL
]
Function: The choice of the equipment which connects to the MIC jack.
Available Values: NOR/RMT/CAT
Default: NOR
NOR: Normal Microphone.
RMT: Optional MH-59A8J Remote Microphone.
CAT: CAT system: if you are using the optional FC-30 antenna tuner, you can still use the
CAT system by connecting the serial Data cable to the MIC jack.
MENU MODE No•060
[
MTR ARX SEL
]
Function: Selects the analog meter display configuration while the transceiver is receiving.
Available Values: SIG, CTR, VLT, N/A, FS, OFF
Default: SIG
SIG: Indicates the incoming signal strength.
CTR: Discriminator center meter.
VLT: Indicates the battery voltage.
N/A: Not available at this time.
FS: Applies a calibration signal (1 mA for full scale) at the METER Jack on the trans-
ceiver bottom, for adjustment of an external meters calibration. This lets you adjust
the external potentiometer in your metering system so that the external meter read-
ing is full scale.
OFF: Disables the meter.
MENU OPERATION
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-857D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-857D in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info