674716
71
Zoom out
Zoom in
Previous page
1/76
Next page
69
Power-on Microprocessor Reset Procedure
Some or all transceiver settings can be reset to their factory-default states using one of the
following power-on routines:
+ POWER on: Reset all memories and following menu setting to factory-default.
Menu #06 (AM STEP), 23 (DCS CODE), 30 (FM STEP), 35 (MEM TAG), 42 (RPT
SHIFT), 47 (SSB STEP), and 48 (TONE FREQ).
+ POWER on: Reset all menu setting (except following menu) to factory-default.
Menu #06 (AM STEP), 23 (DCS CODE), 30 (FM STEP), 35 (MEM TAG), 42 (RPT
SHIFT), 47 (SSB STEP), and 48 (TONE FREQ).
+ POWER on: CPU master reset for all memories and menu setting.
Some menu mode items are not initialized unless turn the power switchoff and on
after having performed “Menu Mode Reset” or “All Reset”.
Appendix
BAND DATA FORMAT
The FT-818 BAND DATA Format (available on the ACC jack) is presented below. The
BAND DATA line provides a stepped voltage, which denotes the current operating band.
This data may be interpreted by an external device (such as an antenna switch or ampli-
er)to provide automatic band switching.
BAND LEVEL BAND LEVEL BAND LEVEL BAND LEVEL
1.8 MHz 0.33 V 10 MHz 1.33 V 21 MHz 2.33 V 50 MHz 3.33 V
3.5 MHz 0.67 V 14 MHz 1.67 V 24.5 MHz 2.67 V 144 MHz 3.67 V
7 MHz 1.00 V 18 MHz 2.00 V 28 MHz 3.00 V 430 MHz 4.00 V
Use shielded cable for interconnections to external devices, so as to prevent RF interfer-
ence.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-818ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-818ND in the language / languages: English as an attachment in your email.

The manual is 23,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info