674716
65
Zoom out
Zoom in
Previous page
1/76
Next page
63
Cloning
You can transfer all data stored in one transceiver to another set by utilizing the handy
“Cloning” feature. This requires a user-constructed cloning cable which connects the ACC
jacks on the two transceivers as shown below.
To clone from one transceiver to another, use the following procedure:
1. Insert the Clone Cable into the ACC jack of each transceiver.
2. Turn both transceivers off, then press and hold in the
and keys on each radio while turning the
power on again. The “CLONE MODE” notation will appear on
the display.
3. On the “destination” radio, press the
key.
4. Now, on the “source” radio, press the
key. Data will now
be transferred to the “Destination” radio from the “Source” ra-
dio.
5. If there is a problem during the cloning process, “Error” will be
displayed. Check your cable connections and try again.
6. If cloning is successful, turn the “destination” radio off. Now
turn the “source” radio off.
Remove the clone cable. Channel and operating data for both radios are now identical.
They both may be turned on now for normal operation.
When the radio is “Large Character” mode, the radio does not display the “CLONE
MODE” which indicates the “clone mode”. However, the clone operation is the same
method.
GND
KEY DATA ACC
ANT
INPUT 13.8V
:
GND
KEY DATA ACC
ANT
INPUT 13.8V
:
TX D
TX D
RX D
GND
GND
RX D
Source radio
Distination radio
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-818ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-818ND in the language / languages: English as an attachment in your email.

The manual is 23,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info