674716
61
Zoom out
Zoom in
Previous page
1/76
Next page
59
Menu Operation
Menu Item 32 [LOCK MODE]
Function: Select the operation of the front panel’s
key.
Available Values: DIAL/FREQ/PANEL
Default: DIAL
DIAL: Locks
knob only
FREQ: Locks front panel keys and knobs related to frequency control (such as
and
key,
(
A/B
)
key., etc.)
PANEL: Locks all front keys and knobs (except
key and key)
Menu Item 33 [MAIN STEP]
Function: Setting of the
knob’s tuning speed.
Available Values: FINE/COARSE
Default: FINE
You may choose between two speeds for the
knob. Selecting “COARSE” doubles
the tuning rate compared to the default value.
Menu Item 34 [MEM GROUP]
Function: Enable/disable the memory grouping feature
Available Values: OFF/ON
Default: OFF
When this Menu Item is set to “ON,” the 200 “standard” memory channels are partitioned
into ten Memory Groups, each holding up to 20 memory channels.
Menu Item 35 [MEM TAG]
Function: Store Alpha-Numeric “Tags” for the memory channels.
Up to eight characters may be stored. The storage procedure is as follows:
1. Recall the memory channel on which you wish to append a label.
2. Recall this Menu Item [Menu #35 (MEM TAG)].
3. Press the
knob momentarily to initiate storing of the Tag (an under-bar will
appear below the rst character location).
4. Rotate the
knob to select the rst character (number, letter, or symbol) in the
name you with to store, then rotate the
knob clockwise to move to the next
character.
5. Again rotate the
knob to select the next number, letter, or symbol, then rotate
the
knob clockwise to move to the next character’s slot.
6. Repeat step 5 as many times as necessary to complete the name tag for the mem-
ory.
7. Press the
knob to save the A/N (Alpha-Numeric) Tag and exit.
Menu Item 36 [MIC KEY]
Function: Enable/disable CW keying by the microphone’s
[
UP
]
/
[
DWN
]
keys.
Available Values: OFF/ON
Default: OFF
When this Menu Item is set to “ON,” press the microphone’s
[
UP
]
key to send a “dot,” and
press the microphone’s
[
DWN
]
key to send a “dash” (while the built-in electronic keyer is
engaged).
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-818ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-818ND in the language / languages: English as an attachment in your email.

The manual is 23,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info