478498
16
Zoom out
Zoom in
Previous page
1/84
Next page
14 FT-817ND Operating Manual
SPL
Press the key to activate
Split frequency operation be-
tween VFO-A and VFO-B.
TAG
Press the key to select
the display type (Frequency or
Alpha-numeric Tag) during
Memory operation.
PMS
Press the key to activate
the Programmable Memory
Scan feature.
TON
Press the key to activate
CTCSS or DCS operation.
Press and hold in the key
for 1/2 second to recall Menu
#48 (for selecting the CTCSS
tone frequency).
DW
Press the key to activate
the Dual Watch system.
ART
Press the key to initiate
the Auto-Range Transponder
mode.
Press and hold in the key
for 1/2 second to recall Menu
#09 (for selecting the ARTS
“Beep” option).
NAR
Press the key to activate
the “Narrow” filter mode in the
CW (optional YF-122C or YF-
122CN required) mode. On
the FM mode, it also selects
the low-deviation mode re-
quired for HF FM operation on
29 MHz.
Press and hold in the key
for 1/2 second to recall Menu
#38 (to Enable/Disable the
optional filter during installa-
tion).
A/B
Press the key to switch
between VFO-A and VFO-B
on the display.
MW
Press and hold in the key
for 1/2 second to transfer the
contents of the VFO into a
Memory register.
STO
Press the key to store the
contents of the VFO into the
QMB (Quick Memory Bank)
register.
RPT
Press the key to select
the direction of the uplink fre-
quency shift (“–,” “+,” or Sim-
plex) during FM repeater op-
eration.
Press and hold in the key
for 1/2 second to recall Menu
#42 (for setting the shift fre-
quency offset).
SCN
Press the key to initiate
scanning (in the direction of
higher frequencies).
SSM
Press the key to activate
the Spectrum Scope Monitor
feature.
Press and hold in the key
for 1/2 second to recall Menu
#43 (for selecting the SSM
sweep mode).
IPO
Press the key to bypass
the receiver preamplifier,
thereby activating Intercept
Point Optimization for im-
proved overload characteris-
tics.
The IPO feature does not
function on 144/430 MHz.
A=B
Press and hold in the key
for ½ second to copy the con-
tents of VFO-A into the VFO-
B register, so that the two
VFOs’ contents will be identi-
cal.
MC
Press the key to desig-
nate the current Memory
channel to be “skipped” dur-
ing scanning.
RCL
Press the key to recall
the QMB Memory.
REV
Press the key to reverse
the transmit and receive fre-
quencies while working
through a repeater.
PRI
Press the key to activate
the Priority Scan feature.
SCH
Press the key to activate
Smart Search
TM
operation.
ATT
Press the key to engage
the receiver front-end attenu-
ator, which will reduce all sig-
nals and noise by approxi-
mately 10 dB.
The ATT feature does not
function on 144/430 MHz.
Key Key
1
2
3
4
5
6
7
FRONT PANEL CONTROL & SWITCHES
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-817ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-817ND in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info