478466
47
Zoom out
Zoom in
Previous page
1/84
Next page
45FT-7900R OPERATING MANUAL
SCANNING
MEMORY SCANNING
Preferential Memory Scan
The FT-7900R also allows you to set up a “Preferential Scan List” of channels which you
can “flag” within the memory system. These channels are
designated by a “W” icon when you have selected them,
one by one, for the Preferential Scan List.
When you initiate memory scanning, beginning on a channel with the “W” icon appended,
only those channels bearing the “W” icon will be scanned. If you initiate scanning on a
channel which does not have the “W” icon appended, you will scan all channels including
those with the “W” icon appended.
Here is the procedure for setting up and using the Preferential Scan List:
1. Press the
[
V/M
(
MW
)]
key momentarily to enter the Memory Recall mode, if you are not
using memories already.
2. Rotate the DIAL knob to select the channel which you wish to add to the Preferential
Scan List.
3. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
4. Rotate the DIAL knob to select Menu #40 (
SKIPSKIP
SKIPSKIP
SKIP).
5. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to “
ONLYONLY
ONLYONLY
ONLY”. The current channel is listed
on the “Preferential Scan List”.
6. When you have made your selections, press the
[
BAND
(
SET
)]
key momentarily to save the new set-
ting, then press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal
operation.
7. To remove a channel from the Preferential Scan List, select “
OFFOFF
OFFOFF
OFF” in step 5 above.
To initiate Preferential Memory Scan:
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #38 (
SCN MDSCN MD
SCN MDSCN MD
SCN MD).
3. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to “
ONLYONLY
ONLYONLY
ONLY”.
4. Press the
[
BAND
(
SET
)]
key momentarily to save the
new setting, then press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
5. Now, press the
[
SCAN
(
SEL
)]
key momentarily to initiate Preferential Memory Scan-
ning. Only the channels which have the “W” icon appended to the channel number will
be scanned.
6. To cancel Preferential Memory Scanning, select “
MEMMEM
MEMMEM
MEM” in step 3 above.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7900R in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info