478466
27
Zoom out
Zoom in
Previous page
1/84
Next page
25FT-7900R OPERATING MANUAL
CHANNEL STEP SELECTION
The FT-7900Rs synthesizer provides the option of utilizing channel steps of 5/10/12.5/15/
20/25/50/100 kHz per step, as well as an automatic step selection based on the current
operating frequency (“AUTO”), any number of which may be important to your operating
requirements. The FT-7900R is set up at the factory in the “AUTO” configuration, which
probably is satisfactory for most operation. However, if you need to change the channel step
increments, the procedure to do so is very easy; remember to get set up on the desired band
before making any changes, as different steps may be programmed for each operating band.
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #43 (
STEPSTEP
STEPSTEP
STEP).
3. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to select the new channel step size.
4. Press the
[
BAND
(
SET
)]
key momentarily to save the
new setting, then press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
5 kHz and 15 kHz steps are not available for use on above 700 MHz.
RECEIVING MODE SELECTION
The FT-7900R provides for automatic mode change when the radio is tuned to different
operating frequencies. However, should an unusual receiving situation arise in which you
need to change to other receiving mode, the procedure to do so is very easy.
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #35 (
RX MODRX MOD
RX MODRX MOD
RX MOD).
3. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to select the desired receiving mode.
AUTOAUTO
AUTOAUTO
AUTO: Automatic mode setting per default values
for the selected frequency range
FMFM
FMFM
FM: Frequency Modulation (Narrow FM)
AMAM
AMAM
AM: Amplitude Modulation
4. Press the
[
BAND
(
SET
)]
key momentarily to save the new setting, then press and hold in
the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
Unless you have a compelling reason to do so, leave the Automatic Mode Selec-
tion feature on so as to save time and trouble when changing bands. If you make
a mode change for a particular channel or station, you can always store that one channel
into memory, as the mode setting will be memorized along with the frequency informa-
tion.
ADVANCED OPERATION
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7900R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7900R in the language / languages: English as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info