478459
34
Zoom out
Zoom in
Previous page
1/80
Next page
32 FT-7800R OPERATING MANUAL
The FT-7800R provides a wide variety of memory system resources. These include:
“Regular” Memory Channels, which includes:
1000 “Standard” memory channels, numbered “000” through “999.”
5 Home channels, providing storage and quick recall of one prime frequency on each
operating band.
50 sets of band-edge memories also known as “Programmable Memory Scan” chan-
nels, labeled “L1/U1” through “L50/U50.”
20 Memory Banks, labeled “BANK1” through “BANK20.” Each Memory Bank can
be assigned from the “Standard” Memory Channels.
5 “Hyper-Memory” Channels
10 “Weather Broad-
cast” Channels
MEMORY OPERATION
REGULAR MEMORY CHANNEL OPERATION
Memory Storage
1. Select the desired frequency, while operating in the VFO mode. Be sure set up any de-
sired CTCSS or DCS tones, as well as any desired repeater offset. The power level may
be also be set at this time, if you wish to store it.
2. Press and hold in the
[
V/M
(
MW
)]
key for 1/2 second. A
memory number will appear (blinking) on the display.
3. Within ten seconds of pressing the
[
V/M
(
MW
)]
key, use
the DIAL knob or the microphone’s
[
UP
]
/
[
DWN
]
buttons to select the desired memory
channel for storage (if the channel is already occupied by data stored previously, the
“channel frequency” notation will appear on the display).
4. To attach an alpha/numeric name “Tag” to the memory,
press and hold in the
[
V/M
(
MW
)]
key for 1/2 second,
then proceed to the next step; otherwise press the
[
V/M
(
MW
)]
key momentarily to save the entry and exit to normal operation.
WX10
WX9
WX8
WX7
WX6
WX5
WX4
WX3
WX2
WX1
HOME Channels
(5 channels)
L50/U50
L49/U49
L3/U3
L2/U2
L1/U1
000
999
998
003
002
001
Standard Memory Channels
(1000 channels)
PMS Memory Channels
(50 Sets)
1-HP
2-HP
3-HP
4-HP
5-HP
850 MHz Band
430 MHz Band
250 MHz Band
350 MHz Band
144 MHz Band
Regular Memory Channels
Hyper Memory Channels
(5 channels)
Weather Broadcast Channels
(10 channels)
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-7800R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-7800R in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info