674724
14
Zoom out
Zoom in
Previous page
1/47
Next page
14
FT-70DR/DE Advance Manual
The memory name tag registered to the channel is automatically displayed as the memory tag
indication.
Changing between name tag display and frequency display
1. Recall the memory channel or the home channel to be changed.
2. Press the
[
F
]
key, then press the
[
MODE
]
key.
The display changes between the memory tag display and the frequency display.
If a name tag has not been set for the memory/home channel, the beep sounds
and the display will not change.
If the memory channel or home channel is set to display the memory tag, pressing the
[
F
]
key
will temporarily display the frequency indication while “ ” is lighted.
The Memory Channel Only Mode
The FT-70DR/DE may be set to operated only in the registered memory channels.
1. While pressing the
[
V/M
]
key, press and hold the POWER
(LOCK) switch to turn the
transceiver ON.
The memory channel only mode is ON, the previously selected memory channel is
recalled.
Rotating the DIAL knob may be selected.
Inputting the 3 digits of the memory channel using the numeric keys may be re-
called the memory channel directly.
z
In the memory only mode, only the following functions will operate:
Changing the communication mode (press the
[
MODE
]
key)
Group monitor (GM) function (press the
[
GM
]
key)
The transmission mode setting of the AMS function (press the
[
AMS
]
key)
Turning the AMS function ON or OFF (press and hold the
[
AMS
]
key)
Setting of the DG-ID code (press and hold the
[
MODE
]
key)
Reverse function (press the
[
F
]
key, and then press the
[
HM/RV
]
key)
Audio level adjustment (press the VOL key)
SQL level adjustment (press the
[
F
]
key, and then press the MONI/T-CALL switch)
Key lock function (press the POWER
(LOCK) switch
z
Pressing the
[
V/M
]
key or the
[
HM/VM
]
key, will sound the beep, “M-ONLY” will be displayed,
and the function will not operate.
z
Canceling Memory Only Mode
1. Turn the transceiver OFF; and then while pressing the
[
V/M
]
key, press and hold the
POWER (LOCK) switch to turn the transceiver ON.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-70DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-70DR in the language / languages: English as an attachment in your email.

The manual is 6,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-70DR

Yaesu FT-70DR User Manual - English - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info