674724

Yaesu FT-70DR Manual

29
Zoom out
Zoom in
Previous page
1/44
Next page
27FT-70DR/FT-70DE Operating Manual
Scanning Function
The transceiver supports the following four scanning functions:
• VFO Scan
• Memory Channel Scan
• Programmable Memory Scan
(
PMS
)
• Memory Bank Scan
• Weather Alert Scan (USA Version only)
For additional details on the Programmable Memory Scan
(
PMS
)
and Memory Bank Scan, refer
to the Advanced Manual which may be downloaded from the Yaesu website.
VFO Scan
VFO scan function scans the frequencies, and detects signals.
1. Press the
[
V/M
]
key to enter the VFO mode.
2. Press the
[
F
]
key and then press the
[
2
](
SCAN
)
key.
• Scanning starts toward higher frequencies.
• If the DIAL knob is rotated while scanning is
in progress, the scanning will continue up or
down in frequency according to the direction
of the DIAL Knob rotation.
• If the scanner halts on an incoming signal, the back light will turn ON and the decimal point
between the “MHz” and “kHz” digits of the frequency display will blink. Scanning will re-
sume in about five seconds.
3. Press the PTT switch to cancel the scanning.
z
If the scan has paused on a signal, rotating the DIAL knob will cause scanning to resume instantly.
z
The manner in which the scanner resumes after it has paused on a signal may be selected within
approx. 0.1 sec - 10 sec by using the Set Mode
[
53 SCN.STR
]
(
37
)
.
z
When turning the transceiver OFF while scanning, turning the transceiver ON, will cause scanning to resume.
z
To set the transceiver action when scanning stops, see “Setting the Receive Operation When
Scanning Stops” on page
(
37
)
.
z
The following Set Modes allow scanning only the frequencies within the set band frequency range.
The Set Mode
[
49 SCM.WTH
]
the frequency range on memory scanning
(
37
)
.
The Set Mode
[
50 SCV.WTH
]
the frequency range on VFO scanning
(
37
)
.
Memory Channel Scanning
The receiver may be set to scan memory channels:
1. Recall a memory channel to begin memory scanning.
2. Press the
[
F
]
key and then press the
[
2
](
SCAN
)
key.
• Scanning starts toward higher memory channel numbers.
• If the DIAL knob is rotated while scanning is in progress, the scanning will contin-
ue up or down in frequency according to the direction of the DIAL Knob rotation.
• If the scanner halts on an incoming signal, the back light will turn ON and the decimal point
between the “MHz” and “kHz” digits of the frequency display will blink. Scanning will
resume in about five seconds.
3. Press the PTT switch to cancel the scanning.
If the scan has paused on a signal, rotating the DIAL knob will cause scanning to resume next
memory channel.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-70DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-70DR in the language / languages: English as an attachment in your email.

The manual is 12,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-70DR

Yaesu FT-70DR Additional guide - English - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info