674725

Yaesu FT-70DE Manual

27
Zoom out
Zoom in
Previous page
1/44
Next page
25FT-70DR/FT-70DE Operating Manual
Registering to Memory Channels
1. Set the frequency and the communication mode
to be registered to a memory channel.
2. Press the
[
V/M
]
key.
“
” blinks on the LCD.
3. Rotate the DIAL knob to select the desired
channel number.
The channel numbers that do not contain mem-
ory data will blink on the LCD.
4. Press the
[
V/M
]
key.
• If you attempt to register a frequency to a
memory channel that already contains fre-
quency data, “M-WRT?” will appear on the
LCD. Press the
[
V/M
]
key to overwrite the
memory channel.
• The memory tag input screen will be displayed on the LCD.
5. Input the memory tag.
• Use the numeric keys or the DIAL knob to in-
put the characters.
Memory Channel
Number
• Example: Rotating the DIAL knob to display the following characters.
A - Z
(
symbol
)
0 - 9
(
symbol
)
A - Z
• Example:
Press the
[
2
]
key repeatedly to toggle among the following available characters.
A → B → C → 2 → A
···
• Moving the cursor and deleting the input characters
[
BAND
]
key: Moves the cursor to the right
[
MODE
]
key: Moves the cursor to the left
[
GM
]
key
(
press and hold
)
: Erases all characters after the cursor
6. Press and hold the
[
V/M
]
key.
The beep sounds and the memory is saved.
Recalling a Memory Channel
1. Press the
[
V/M
]
key.
The memory channel most recently used appears on the LCD.
2. Rotate the DIAL knob to select the desired memory channel, or input the 3 digits of
the memory channel using the numeric keys to recall the memory channel directly.
3. Press the
[
V/M
]
key to exit the memory mode, and return to the normal operation.
z
The data registered to a memory channel can be transferred to the VFO operating band by
following the procedure below:
Press and hold the
[
V/M
]
key
Rotate the DIAL knob to select the channel
Press and hold
the
[
GM
]
key
“V-WRT?” appears
Press the
[
GM
]
key.
z
Pressing the
[
F
]
key and then rotating the DIAL knob allows skipping memory channels quickly
in steps of 10 memory channels.
z
The transceiver may be placed into a Memory Channel Only mode,
(
which restricts the FT-70DR/DE
to operate only on the memory channels
)
, by pressing the
[
V/M
]
key, while pressing the Power
(
Lock
)
switch to turn the transceiver ON. To cancel the Memory Channel Only mode, turn the transceiver
OFF, then press the
[
V/M
]
key again, while pressing Power
(
Lock
)
switch to turn the transceiver ON.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-70DE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-70DE in the language / languages: English as an attachment in your email.

The manual is 12,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FT-70DE

Yaesu FT-70DE Additional guide - English - 47 pages

Yaesu FT-70DE User Manual - German - 44 pages

Yaesu FT-70DE Additional guide - German - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info