Manual Yaesu FT-60R-E (page 65 of 84) (English)

478475

Zoom out

Zoom in

1/84

FT-60R/E OPERA TING MANUAL 63

DCS CODE INVERSION

The DCS system was first introduced in the commercial LMR (Land Mobile Radio) ser-

vice, where it is now in widespread use. DCS is sometime referred to by its different propri-

etary names, such as DPL

(Digital Private Line

, a registered trademark of Motorola,

Inc.).

DCS uses a codeword consisting of a 23-bit frame, transmitted (subaudible) at a data rate

of 134.4 bps (bit/sec). Occasionally, signal inversion can result in the complement of a

code to be sent or received. This prevents the receiver’s squelch from opening with DCS

enabled, as the decoded bit sequence would not match that selected for operation.

Typical situations that might cause inversion to occur are:

 Connection of an external receiver preamplifier.

 Operating through a repeater.

 Connection of an external linear amplifier.

Note that code inversion does not mean that any of the above listed equipment is defec-

tive!

In certain amplifier configurations, the output signal (phase) is inverted from the input.

Small signal or power amplifiers having an odd number (1, 3, 5, etc.) of amplification

stages may result in inversion of a transmitted or received DCS code.

While under most circumstances this should not occur (amplifier designs and industry

standards take this into account), if you find that your receiver squelch does not open

when both you and the other station are using a common DCS code, you or the other

station (but not both) can try the following:

1. Press the

[

F/W

]

key, then press the

[

( )

SET

]

key to enter the Set mode.

2. Rotate the DIAL knob to select Set Mode Item 14: DCS.N/R.

3. Press the

[

F/W

]

key momentarily, then rotate the DIAL knob to

select one of the following modes:

T/RX N:Encoder, Normal; Decoder, Normal

RX R: Encoder, Normal; Decoder, Reverse (Inverted)

TX R: Encoder, Reverse (Inverted); Decoder, Normal

T/RX R:Encoder, Reverse (Inverted); Decoder, Reverse (Inverted)

4. When you have made your selection, press the PTT switch to save the new setting

and exit to normal operation.

5. Remember to restore the default setting to “T/RX N” (Encoder; Normal, Decoder;

Normal) when done.

MISCELLANEOUS SETTINGS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-60R-E in the language / languages: English as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yaesu FT-60R-E Manual

Product: