478475
38
Zoom out
Zoom in
Previous page
1/84
Next page
FT-60R/E OPERATING MANUAL36
4. The scanner will then resume according to the Scan-Resume mode selected in the
previous section.
5. To cancel scanning, press the PTT switch or
[
V/M
(
PRI
)]
key.
Programmed VFO Scan
1. Select the VFO mode by pressing the
[
V/M
(
PRI
)]
key, if necessary.
2. Press and hold in the
[
BAND
(
BAND DN
)]
key for one second, then rotate the DIAL
knob to select the bandwidth for the Programmed VFO scan-
ner. Available selections are ±1 MHz, ±2 MHz, ±5 MHz, ALL,
PMS-X, and BAND.
ALL: The scanner will sweep all frequencies.
PMS-X: The scanner will sweep frequencies within the currently-selected PMS fre-
quency pair. See page 40 for details.
BAND: The scanner will sweep frequencies only on the current band.
3. Press the
[
BAND
(
BAND DN
)]
key momentarily to save the new setting and exit to
normal operation.
4. Press and hold in the
[
V/M
(
PRI
)]
key for one second to start scanning.
5. If and when the scanner encounters a signal strong enough to
open the squelch, the scanner will halt temporarily; the decimal
point of the frequency display will blink during this “Pause”
condition.
6. The scanner will then resume according to the Scan-Resume mode selected in the
previous section.
7. To cancel scanning, press the PTT switch or
[
V/M
(
PRI
)]
key.
1) When you start the Programmed VFO Scanner, the FT-60R/E will be chang-
ing frequency in the upward direction. If you want to change direction of the
scan while it is underway, rotate the DIAL knob one click in the opposite
direction (in this case, one click counter-clockwise). You’ll see the scanner turn around
and change frequency downward!
2) You may change the scanners method of operation so that the VFO frequency will
jump to the low band edge of the next band when the VFO frequency reaches the high
edge of the current band (or vice versa). See page 78 regarding Set Mode Item 54: VFO
.BND.
SCANNING
VFO SCANNING
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-60R-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-60R-E in the language / languages: English as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info