478475
35
Zoom out
Zoom in
Previous page
1/84
Next page
FT-60R/E OPERA TING MANUAL 33
MEMORY MODE
MEMORY BANK OPERATION
The large number of memories available in the FT-60R/E could be difficult to utilize
without some means of organizing them. Fortunately, the FT-60R/E includes provision
for dividing the memories into as many as ten Memory Groups, so you can categorize the
memories in a manner convenient to you. You may enter and exit the “Memory Group”
mode by a single press of the
[
BAND
(
BAND DN
)]
key, as we shall see below.
Assigning Memories to a Memory Bank
1. Recall the memory channel to be assigned to a Memory Bank.
2. Press and hold in the
[
BAND
(
BAND DN
)]
key for one second,
then rotate the DIAL knob to select the Memory Bank number
you want as the Memory Bank for this channel (“BANK 1” ~
BANK10”).
3. Press and hold in the
[
F/W
]
key for one second to copy the memory
channel data into the Memory Bank.
1) You may assign one
memory channel into several
Memory Banks.
2) The PMS memory channels (L1/U1
through L50/U50) may not be assigned
to a Memory Bank.
Memory Bank Recall
1. Press the
[
V/M
(
PRI
)]
key, if needed, to enter the Memory mode.
2. Press and hold in the
[
BAND
(
BAND DN
)]
key, then rotate the
DIAL knob to select the desired Memory Bank (“BANK 1
through “BANK10”).
3. Press the
[
V/M
(
PRI
)]
key momentarily; now, as you rotate the
DIAL knob to select memories, you will observe that you can
only select memory channels in the current memory bank. The
” indication will appear at the left side of the frequency
display while operating within a Memory Bank.
4. To change to another Memory Bank, press and hold in the
[
BAND
(
BAND DN
)]
key,
rotate the DIAL knob to select the new Memory Bank, then press the
[
V/M
(
PRI
)]
key
momentarily.
5. To exit from Memory Bank operation, select “NOBANK” in step 4 above. You are
now in the “standard” Memory Recall mode, without utiliza-
tion of the Memory Banks. The memories stored in the various
Banks will remain in those banks, however; you do not need to
store them again.
Memory Channel
CH 000 145.000 MHz
CH 001 145.500 MHz
CH 002 435.000 MHz
CH 003 435.500 MHz
CH 004 145.800 MHz
CH 005 436.000 MHz
CH 006 128.800 MHz
CH 997 145.620 MHz
CH 998 436.780 MHz
CH 999 128.600 MHz
Memory Bank “5”
Air Band Channels
Memory Bank “4”
Club Channels
Memory Bank “3”
All Amateur Band Channels
Memory Bank “1”
144 MHz Amateur Band Channels
Memory Bank “2”
430 MHz Amateur Band Channels
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-60R-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-60R-E in the language / languages: English as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info