478475
32
Zoom out
Zoom in
Previous page
1/84
Next page
FT-60R/E OPERATING MANUAL30
LABELING MEMORIES
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid
in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set Mode.
1. Recall the memory channel on which you wish to append a
label.
2. Press the
[
F/W
]
key, then press the
[
0
( )
SET
]
key to enter the
Set mode.
3. Rotate the DIAL knob to select Set Mode Item 28: NM WRT.
4. Press the
[
F/W
]
key momentarily to display the previously stored
label (if any).
5. Press the
[
F/W
]
key again to clear any previous label.
6. Rotate the DIAL knob to select the first digit of the desired
label.
7. Press the
[
F/W
]
key to move to the next character.
8. If you make a mistake, press the
[
(
MHz
)]
key to back-space the cursor, then re-
enter the correct letter, number, or symbol.
9. Repeat steps 5 through 7 to program the remaining letters, numbers, or symbols of the
desired label. A total of six characters may be used in the creation of a label.
10. When you have programmed a label which is under 6 characters, press and hold in the
[
F/W
]
key for one second to confirm the label (if the label is
exactly 6 characters in length, you do not need to press and
hold in
[
F/W
]
).
11. When you have completed the creation of the label, press the PTT key to save the
label and exit.
To display the alpha-numeric “Tag” (label):
1. Set the FT-60R/E to the “MR” (Memory Recall) mode, and
recall the memory channel on which you wish to display its
label.
2. Press the
[
F/W
]
key, then press the
[
0
( )
SET
]
key to enter the
Set mode.
3. Rotate the DIAL knob to select the Set Mode Item labeled 27:
NAME.
4. Press the
[
F/W
]
key momentarily to enable adjustment of this
Item’s setting.
5. Rotate the DIAL knob to set this Set Mode Item to “ALPHA
(thus enabling the alpha-numeric display).
6. Press the PTT key to save the new setting and activate the al-
pha-numeric Tag.
MEMORY MODE
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-60R-E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-60R-E in the language / languages: English as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info