674732
69
Zoom out
Zoom in
Previous page
1/102
Next page
Page 67FT-450D OPERATION MANUAL
S
CANNING
O
PERATION
VFO/Memory Scan
1. Rotate the
[
SQL/RF GAIN
]
knob just to the point
where the noise is silenced and the “ ” indi-
cator on the display turns off.
2. Press the
[
SCAN/PMS
]
key to initiate upward
scanning (toward higher frequencies or higher
memory channel numbers).
3. If you want to change direction of the scan while it
is underway, rotate the
[
MAIN DIAL
]
knob one click
in the opposite direction (in this case, one click
counter-clockwise). You will see the scanner re-
verse direction and scan down in frequency.
You may change the direction of the scanner by
pressing and holding the microphone’s
[
UP
]
/
[
DWN
]
key for one second, if you are using the
MH-31A8J Hand Microphone or optional MD-
100A8X Desktop Microphone.
4. In FM/AM mode, when the scanner encounters a
signal strong enough to open the squelch, the
scanner will halt for five seconds, after which scan-
ning will resume.
In the SSB/CW and SSB-based Data modes,
when the scanner encounters a signal strong
enough to open the squelch, the scanner will step
across the signal very slowly, giving you time to
stop the scan, if you like.
5. To stop the scanner, press the
[
SCAN/PMS
]
but-
ton or PTT switch.
AD VICE:
You may select the manner in which the scanner re-
sumes while it has paused on a signal, using Menu
Item “SCN RES” The default “5Sec” setting will cause
the scanner to resume scanning after five seconds;
you may change it, however, to resume only after the
carrier has dropped out, if you like See page 85.
During Memory Group operation, only the channels
within the current Memory Group will be scanned.
[
DSP/SEL
]
Knob
[
SCAN/PMS
]
button
[
SQL/RF GAIN
]
Knob
VFO AND MEMORY SCANNING
[
MAIN DIAL
]
Knob
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450D in the language / languages: English as an attachment in your email.

The manual is 7,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info