674732
59
Zoom out
Zoom in
Previous page
1/102
Next page
Page 57FT-450D OPERATION MANUAL
FM MODE OPERATION
TONE SEARCH SCANNING
In operating situations where you don’t know the CTCSS tone being used by another station or stations, you can
command the radio to listen to the incoming signal and scan in search of the tone being used. Two things must
be remembered in this regard:
You must be sure that your repeater uses the same tone type (CTCSS).
Some repeaters do not pass the CTCSS tone; you may have to listen to the station(s) transmitting on the
repeater uplink (input) frequency in order to allow Tone Search Scanning to work.
To scan for the tone in use:
1. Set the radio up for CTCSS operation (see the
previous discussion). The “ ” icon will
appear on the display.
2. Press and hold the
[
F
]
button for one second to
enter the Menu mode. The “ ” icon will ap-
pear on the display.
3. Rotate the
[
DSP/SEL
]
knob to select the menu
item “TONE F”.
4. Press the
[
DSP/SEL
]
knob to enable adjustment
of the selected Menu Item. The “ ” icon will
be blinking.
5. Press the
[
SCAN/PMS
]
button to start scanning
for the incoming CTCSS tone.
6. When the radio detects the correct tone, it will
halt on that tone, and audio will be allowed to pass.
7. Press the
[
DSP/SEL
]
knob to lock in that tone.
8. Press and hold the
[
F
]
button for one second to
return to normal operation.
NOTE:
If the Tone Scan feature does not detect a tone, it will
continue to scan indefinitely. When this happens, it
may be that the other station is not sending any tone.
You can press the
[
SCAN/PMS
]
button to halt the
scan at any time.
[
SCAN/PMS
]
button
[
F
]
button
[
DSP/SEL
]
knob
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450D in the language / languages: English as an attachment in your email.

The manual is 7,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info