674732
32
Zoom out
Zoom in
Previous page
1/102
Next page
Page 30 FT-450D OPERATION MANUAL
Referring to Figure “B”, this is default band-
width.
By rotating the
[
DSP/SEL
]
knob to the left,
the bandwidth will narrow (see Figure “A”),
while rotation of the
[
DSP/SEL
]
knob to the
right, as depicted in Figure “C”, will widen the
bandwidth.
The default bandwidths, and total bandwidth
adjustment range, will vary according to the
operating mode:
SSB Mode: 1.8 kHz / 2.4 kHz / 3.0 kHz
(Nominal: 2.4 kHz).
CW Mode: 300 Hz / 500 Hz / 2.4 kHz
(Nominal: 2.4 kHz).
DATA Mode:300 Hz / 2.4 kHz / 3.0 kHz
(Nominal: 2.4 kHz).
AM Mode: 3.0 kHz / 6.0 kHz / 9.0 kHz
(Nominal: 6.0 kHz).
FM Mode: 2.5 kHz / 5.0 kHz
(Nominal: 5.0 kHz).
A B C
WIDTH
(
INTERFERENCE REJECTION “SIGNALS WITHIN 3 KHZ
)
The IF Width tuning system allows you to vary the width of the DSP IF passband with three steps (FM: two
steps), so as to eliminate interference. Moreover, the bandwidth may actually be expanded from its default
setting, should you wish to enhance incoming signal fidelity when interference on the band is low.
CONVENIENCE FEATURES
1. Press the
[
DSP
]
button several times to set the
>” icon to the “WIDTH” indicator of the DSP
Graphic Display on the display, to enable adjust-
ment of the bandwidth by the
[
DSP/SEL
]
knob.
2. Rotate the
[
DSP/SEL
]
knob to adjust the band-
width. Counter-clockwise rotation reduces the
bandwidth, while clockwise rotation increases the
bandwidth.
“WIDTH” Indicator
[
DSP
]
button
[
DSP/SEL
]
knob
Using IF Shift and Width Together
The IF Shift and Variable IF Width features
together form a very effective interference-
fighting filtering system.
For example, in Figure “A” you can see how
interference has appeared both on the high
and low sides of the desired signal. By rotat-
ing the
[
DSP/SEL
](
WIDTH
)
knob, as shown
in Figure “B”, the interference from one side
can be eliminated, and by re-positioning the
[
SHIFT
]
knob (Figure “C”), the interference
on the opposite side can be removed, with-
out re-introducing the interference previously
eliminated in Figure “B”.
Advice: For best interference reduction, the
Width and Shift features are the primary tools
you should use. After narrowing the bandwidth
(Width) and/or adjusting the center of the
passband (Shift), the Contour control may
also yield additional signal-enhancement ben-
efits on the net residual bandwidth. What’s
more, the IF Notch Filter (see the next sec-
tion) may also be utilized, in conjunction with
the three other filter systems, to significant
advantage.
A B C
IF
BANDWIDTH
IF
BANDWIDTH
IF
BANDWIDTH
IF
BANDWIDTH
IF
BANDWIDTH
IF
BANDWIDTH
Desired Signal Desired Signal Desired Signal
QRM
QRMQRMQRM
QRMQRM
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450D in the language / languages: English as an attachment in your email.

The manual is 7,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info