444588
54
Zoom out
Zoom in
Previous page
1/104
Next page
Page 52 FT-450 OPERATION MANUAL
BASIC OPERATION
1. Press the
[
BAND
]
/
[
BAND
]
buttons to select
the 28 MHz or 50 MHz.
Note: FM is only used in the 28 MHz and 50 MHz
Amateur bands covered in the FT-450. Please
do not use FM on any other bands.
2. Press the
[
MODE
]
/
[
MODE
]
buttons to select
the FM mode.
3. Rotate the
[
MAIN DIAL
]
knob to adjust the oper-
ating frequency.
If you use the optional MH-31A8J or MD-100A8X,
you may adjust the operating frequency by the
[
UP
]
/
[
DWN
]
buttons on the microphone.
4. Press the microphone’s PTT (Push To Talk)
switch to begin transmission. Speak into the mi-
crophone in a normal voice level.
The “ ” icon will appear in the display, con-
firming that transmission is in progress.
5. Release the PTT switch at the end of your trans-
mission. The transceiver will return to the receive
mode.
FM MODE OPERATION
NOTE:
At the factory, a microphone gain has been pro-
grammed that should be satisfactory for the supplied
MH-67A8J Hand Microphone. If you use an after-mar-
ket microphone, you may wish to set a different Mi-
crophone Gain Level, described previously (Micro-
phone Gain Level Adjustment: see page 37)
[
MAIN DIAL
]
knob
[
BAND
]
/
[
BAND
]
button
[
MODE
]
/
[
MODE
]
button
MIC
ON/OFF
-SHIFT+
DSP ATT/IPO NB AGC BAND BAND TUNE F
DSP/SEL SQL/RF GAIN AF GAIN
A/B
LOCKFAST
A=B
MODE
MODE
CLARKEYER
SPLIT
STEP
SCAN
PMS
RCL
STO
VOX
C.S
V/M
PHONES
KEY
NOTICE
Regarding of the
[
DSP/SEL
]
knob
The
[
DSP/SEL
]
knob is used for operating
various functions depending on the situation.
If you can not change the frequency/memory
channel by tuning the
[
DSP/SEL
]
knob, the
[
DSP/SEL
]
knob is selected to operate of one
of the DSP functions.
In this case, press the
[
DSP
]
button several
times until the “>” icon disappears from the
DSP Graphic Display.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info