444588
44
Zoom out
Zoom in
Previous page
1/104
Next page
Page 42 FT-450 OPERATION MANUAL
SSB/AM MODE TRANSMISSION
VOICE MEMORY
(
SSB/AM/FM MODES
)
You may utilize the Voice Memory capability of the FT-450 for repetitive messages. The Voice Memory system
includes two memories (VM1 and VM2) capable of storing up to 10 seconds of voice audio each. The maximum
that both memories can hold is 10 seconds.
Recording Your Own Voice in Memory
1. Assign the “VM1REC” (Voice Recording) function
to the
[
VOICE/C.S
]
button using the procedure in
the box below.
2. Select the LSB, USB, AM, or FM mode using the
[
MODE
]
/
[
MODE
]
buttons.
2. Press the
[
VOICE/C.S
]
button. AVM1 REC” no-
tation will appear in the display.
3. Press and hold the microphone’s PTT switch, the
radio display will count down.
(“VM1
3” VM1
2” VM1
1” VM1 10”
......
)
5. When the display Shows “VM1 10”, speak into
the microphone in a normal voice level to record
the message (such as “CQ DX, CQ DX, this is W
6 Delta X-Ray Charlie, W 6 Delta X-Ray Charlie,
Over”). Remember that the time limit for record-
ing is 10 seconds.
6. Release the PTT switch to terminate the mes-
sage storage process.
Checking Your Recording
1. Assign the “VM1MONI” (Voice Monitoring) func-
tion to the
[
VOICE/C.S
]
button using the proce-
dure in the box below.
2. Select the LSB, USB, AM, or FM mode using the
[
MODE
]
/
[
MODE
]
buttons.
3. Press the
[
VOICE/C.S
]
button, and you will hear
the contents of the voice memory you just re-
corded.
4. You may adjust the playback level of the record-
ing by the
[
AF GAIN
]
knob.
Transmitting the Recorded Message
1. Assign the “VM1TX” (Voice Transmitting) func-
tion to the
[
VOICE/C.S
]
button using the proce-
dure in the box below.
2. Select the LSB, USB, AM, or FM mode using the
[
MODE
]
/
[
MODE
]
buttons.
3. Press the
[
VOICE/C.S
]
button to transmit the con-
tents of the voice memory you just recorded.
4. You may adjust the playback level of the record-
ing by the
[
AF GAIN
]
knob.
How to assign a function to the
[
VOICE/C.S
]
button
1. Press and hold the
[
F
]
button for one second
to enter the Menu Mode. The “ ” icon
will appear on the display.
2. Rotate the
[
DSP/SEL
]
knob to select Menu
Item “PNL-C.S”.
3. Press the
[
DSP/SEL
]
knob to enable adjust-
ment of this Menu Item. The “ ” icon
will be blinking.
4. Rotate the
[
DSP/SEL
]
knob to select the de-
sired function.
5. Press the
[
DSP/SEL
]
knob. The “ ” icon
returns to appear continuously.
6. Press and hold the
[
F
]
button for one second
to return to normal operation.
[
F
]
button
[
DSP/SEL
]
knob
[
VOICE/C.S
]
button
[
MODE
]
/
[
MODE
]
button
[
AF GAIN
]
button
ADVICE
You may perform the Voice Memory operation
with the memory slot “VM2 (VM2REC,
VM2MONI, and VM2TX)” instead of memory
slot “VM1 (VM1REC, VM1MONI, and VM1TX)”.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT-450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT-450 in the language / languages: English as an attachment in your email.

The manual is 9,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info